Manual Metabo MAG 28 LTX 32 (page 14 of 112) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish)

595085

Zoom out

Zoom in

1/112

ENGLISH

ENG

The ideal storage temperature is between 10°C

and 30°C.

Li-ion battery packs Li-Power (25.2 V)

have a

capacity and signal display (21):

- Press button

(20)

and the charge level is

displayed by the LEDs .

- If one LED is flashing, the battery pack is almost

flat and must be recharged.

- If all LED are flashing, the battery pack is too

warm. Allow the battery pack to cool down. You

can do this quickly using ASS 15 Plus battery

charger.

6.2 Removing and inserting the battery

pack

Removal:

Press both battery pack release buttons

(19)

and

take out battery pack

(18)

Inserting:

Slide in the battery pack (18) until it engages.

7.1 Attaching the Securing Strap

For drilling carried out on angled and vertical

surfaces and overhead, the magnetic drill

stand must be secured with the

securing strap

(28)supplied to prevent it from falling, even if the

magnet malfunctions.

Fit the

securing strap

(28) so that the

magnetic drill stand is moved away from the

operator if the magnet malfunctions.

Replace the

securing strap

(28) if it has had

to catch a falling magnetic drill stand.

Caution! Check the

securing strap

(28)

for

damage. Before using the

securing strap

(28), always check it carefully to ensure it is oper-

ating faultlessly and as specified. If the

securing

strap

(28)

is damaged or if the ratchet (27) is no

longer working properly, replace the

securing

strap

immediately.

-Fit the

securing strap

(28) on one of the two

holding points (29) of the magnetic drill stand.

- Then secure the

securing strap

to another suit-

able fastening point or to the material being

processed.

- Notes on the

securing strap

(28):

Insert the free end of the

securing strap

from

below through the opening in the ratchet shaft

and then tension the free end of the

securing

strap until it is loosely fitted.

The strap must not be tightly fitted: you

must be able to unroll the securing strap

more than one rotation about the ratchet

shaft

This is essential to ensure secure

fastening.

Tension the securing strap with a

pumping action on the ratchet lever (a).

- Ensure that the securing strap is guided to be

taut in position.

- Check that the strap connection is secure.

The

securing strap

does not replace the

magnetic force of the magnetic drill stand: it

is simply used to secure against falling in the event

of a magnet malfunction.

To loosen the

securing strap:

Caution: the tension is released in sudden

bursts! To loosen the

securing strap

, open

the ratchet fully and simultaneously use your

finger to pull the locking strap (b) upward.

7.2 Cooling Lubrication Unit for Core Drill-

ing

The tool life depends on the lubrication. Lubri-

cating the inside of the core drill bit with high-

performance cutting oils is essential for core

drilling.

To fill with oil, remove the container (4) from

the magnetic drill stand.

Fill the container with high-performance cutting oil

(4) and close the screw cap. Switch the lubrication

on or off at the supply cock (3).

For work carried out on vertical and overhanging

surfaces or overhead surfaces (and when storing

the unit in the case), the c

ontainer

(4)

must be

emptied or removed to prevent liquid from

escaping (otherwise there is a risk of

cutting oil

entering the motor and causing a short-circuit)

When carrying out this type of task, spray the

inside of the cutting edge tool before drilling with

universal cutting spray (see chapter 10 Accesso-

ries). Repeat the process several times for larger

drilling depths.

7Use

(b)

(a)

17027057_0211 MAG 28 LTX 32.book Seite 14 Dienstag, 1. März 2011 1:15 13

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Metabo MAG 28 LTX 32 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 6,25 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Metabo MAG 28 LTX 32 Manual

Product: