625661
16
Zoom out
Zoom in
Previous page
1/128
Next page
16
ENGLISH
ENG
When working in areas where there is possibility of
head injuries, wear a helmet and when felling and
delimbing trees, wear an additional face mask.
Always remove the plug from the mains socket
before checking the chain tension, retightening the
chain, changing the chain, eliminating faults and
prior to every change of workplace.
Dust from material such as paint containing lead,
some wood species, minerals and metal may be
harmful. Contact with or inhalation of the dust may
cause allergic reactions and/or respiratory
diseases to the operator or bystanders.
Certain kinds of dust are classified as carcinogenic
such as oak and beech dust especially in conjunc-
tion with additives for wood conditioning (chro-
mate, wood preservative). Material containing
asbestos must only be treated by specialists.
- The work place must be well ventilated.
- The use of a dust mask of filter class P2 is
recommended.
Follow national requirements for the materials you
want to work with.
See page 3 (please unfold).
1 Switch handle
2 Locking button
3Trigger
4 Chain wheel cover
5Nuts
6 Sealing cap (chain lubricating oil)
7 Adjusting screw (oil delivery volume)
8Handle
9 Hand protection
10 Cutter
11 Cover for oil channel
12 Oil channel
13 Clamping screw (chain tension)
14 Oil inlet bore for cutter
15 Bore
16 Pronged stop
17 Chain tensioning pin
18 Stud bolt
19 Chain wheel
20 Oil sight glass
Unique safety thanks to the patented Metabo
wrap-spring chain brake. In case of a back-kick
or if the trigger is released, the chainsaw comes
to a standstill within 1/10 (!) of a second.
Sawing chain with safety driving links to reduce
the risk of back-kicks
Large hand-protection element. In case of a
back-kick, the hand protection is pushed
forward by the back of the operator's hand and
trips the quick brake of the chainsaw.
Switch with lock to protect against unintentional
start of the chainsaw
Robust motor with high power reserves
7.1 Fitting cutter and sawing chain
See illustration, page 3 (please unfold).
Pull the mains plug out of the socket.
Wear protective gloves.
1. Unscrew the nuts (5) and take off the chain
cover (4).
2. Turn the clamping screw (13) anticlockwise as
far as the stop to bring the chain clamping pin
(17) into its left final position.
3. Note:
see illustration 1, page 3. When the chain
has been placed on the cutter, the cutting
edges of the sawing chain cutters (a) must
point in direction of rotation.
Note:
the direction of rotation of the sawing
chain is indicated by the two arrows on the
chain wheel cover (4).
See illustration 1, page 3. Hold the cutter with
its front end upward and mount the sawing
chain so that the teeth (b) of the deflector star
of the cutter engage in the chain links and the
chain driving links are seated in the cutter
groove.
4. Then place the sawing chain around the chain
wheel (19) and mount the cutter with its long
hole on both stud bolts (18) so that the chain
tensioning pin (17) engages in the bore (15) of
the cutter.
5. Refit the chain wheel cover (4) and fit the nuts
(5) but do not yet tighten.
6. Turn the clamping screw (13) clockwise until
the sawing chain no longer sags at the lower
edge of the cutter. Raise the front end of the
cutter while doing this.
7. The sawing chain is correctly tensioned if, in
the middle of the cutter, it can be lifted 3 to 4
mm from the cutter upper edge (see illustration
2, page 3).
5Overview
6 Special Product Features
7 Commissioning
17026724_1207 KT 1441.book Seite 16 Montag, 10. Dezember 2007 2:11 14
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Metabo KT 1441 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Metabo KT 1441 in the language / languages: All languages as an attachment in your email.

The manual is 10,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info