595374
17
Zoom out
Zoom in
Previous page
1/120
Next page
ENGLISH
17
ENG
7.6 Extraction connection piece / dust
ejection
The nozzle (12) can be rotated to the desired posi-
tion to extract or eject chips. To do this, push the
nozzle in up to the stop, turn and pull out again.
The nozzle can be locked in 45° increments so that
it cannot turn.
Sawdust extraction:
connect a suitable dust extraction unit with suction
hose to the machine to extract the sawdust.
8.1 Switching on and off
Switching on:
Press locking button (10) and hold
in; then actuate the trigger (11).
Switching off:
Release the trigger (11).
8.2 Signal display (KSE 68 Plus)
The signal display (13) lights up briefly when the
machine is switched on and indicates operational
readiness. If the signal display lights up during
operation, this indicates overloading. Reduce the
load on the machine.
8.3 Working instructions
Lay out the mains cable such that the cut can be
executed without obstruction.
For this purpose, the mains cable can be held by
the cable guide (9).
The markings (17) are designed to help the user
when positioning the machine and sawing the
workpiece. In the case of maximum depth of cut,
they mark approximately the outside diameter of
the saw blade and thus the cutting area.
Do not switch the machine on or off while the
saw blade is touching the workpiece.
Let the saw blade reach its full speed before
making a cut.
When the hand-held circular saw is added, the
movable safety guard is swung backwards by the
workpiece.
KSE 68 Plus: the movable safety guard can be
swung backwards manually using the lever (8) to
make the machine easier to position on the work-
piece.
When sawing, never remove the machine
from the material with the saw blade turning.
Allow the saw blade to come to a standstill.
If the saw blade blocks, turn the machine off
immediately.
Sawing along a straight line:
the cutting indicator is used here (5). The width of
the cutting indicator represents roughly the width
of the saw disc.
Sawing along a rail secured on the workpiece:
In order to achieve an exact cutting edge, you can
attach a rail to the workpiece and then guide the
hand-held circular saw along this rail by means of
the guide plate (1).
Sawing with parallel stop:
For cuts parallel to a straight edge.
The double parallel stop (7) can be inserted from
either side into the support provided for it.
Main-
tain parallelism to the saw blade when making
the setting.
Retighten the front and then the rear
locking screw (3). It is best to calculate the exact
cut width by making a test cut.
For cuts parallel to a straight workpiece edge:
Apply the parallel stop (7) such that the stop rail is
facing down.
For cuts parallel to a straight edge on the work-
piece: Apply the parallel stop (7) such that the stop
rail is facing up.
8.4 Sawing with guide rail 6.31213
For straight and splinter-free cutting edges accu-
rate to the millimetre. The anti-slip coating keeps
the surface safe and protects the workpiece
against scratches. The machine can be placed
against the stops on the guide rail for plunge
cutting and cuts can be executed with a uniform
length.
For guide rail 6.31213, see
chapter on Accesso-
ries.
Depending on the application type and cutting
width, the parallel stop (7) can be inserted from the
right or left into its holder.
Sawing very narrow sections:
Insert the parallel stop (7) from the right into its
holder.
Clean the machine regularly. This includes vacuum
cleaning the ventilation louvres on the motor.
Changing saw blades
Pull the plug out of the plug socket before
any adjustments or servicing are performed.
- Press in the spindle locking button (28) and hold
in place. Turn the saw spindle slowly with the
8Use
9 Tips and Tricks
10 Maintenance
17026944_0209 KSE 6x Plus MG-Guss.book Seite 17 Montag, 26. Januar 2009 2:08 14
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Metabo KS 66 PLUS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Metabo KS 66 PLUS in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 5,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info