600612

Metabo KLL 2-20 Manual

9
Zoom out
Zoom in
Previous page
1/80
Next page
en
9
Main applications:
Operating modes
The KLL 2-20 can be used in 2 operating modes:
1. as a self-levelling line laser 2. as a laser instrument for marking
+ plumb line laser applications without the levelling function
Operating mode with self-levelling
A laser line can be selected in this mode.
Commissioning
The instrument is switched on with the on/o switch (1b). Horizontal and
vertical laser lines and the plumb line points appear a er switching on.
The laser will automatically level itself.
Setting the type of line:
The vertical and horizontal laser lines with the plumb line point and the cross
laser line can be set a er each other by pressing the selector switch (1a).
The laser will flash if the inclination is too great !
laser beam flashing-> The unit is inclined too much
+ is outside the self-levelling range
+ the laser cannot level itself automatically
Operating mode without levelling function:
The on/o switch (1b) is switched o . In this mode the KLL 2-20 is only swit-
ched on or o with the selector switch (1a).
Plumb line function mode
The foot can be extended in order to improve the visibility of the lower
plumb line point. The KLL 2-20 is positioned and switched on ( switch 1b ).
The laser down beam is aligned as required to the object or a mark.
Mark the position of the up laser beam on the ceiling. The laser lines
are always switched on at the same time as the plumb line laser points.
Always ensure that the centre of the laser line is marked !
Checking the calibration
KLL 2-20 crossed line and plumb line laser is designed for use on the
construction sites and left our factory perfectly adjusted. As with any
precision instrument, however, its calibration must be regularly checked.
The unit should be checked before starting any new tasks, particularly
when the unit has been exposed to strong vibrations.
B1
C1
C2
C3
C4
B2
A4
A4
E1
E2
E3
D2
D3
D1
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Metabo KLL 2-20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Metabo KLL 2-20 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 0,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info