595390

Metabo KHE 76 Manual

11
Zoom out
Zoom in
Previous page
1/80
Next page
ENGLISH
11
ENG
Always wear protective goggles, gloves, a dust
mask and sturdy shoes when working with this
tool.
Ensure that the spot where you wish to work is free
of
power cables, gas lines or water pipes
(e.g.
using a metal detector).
Always work with the tool attached correctly. Pull
on the tool to check that it is seated correctly. (It
must be possible to move the tool a few centime-
tres in an axial direction.)
When working above ground level, make sure that
the area underneath is free.
Do not touch the tool or parts close to the tool
immediately after stopping work because they
may still be extremely hot and could cause skin
burns.
Always lay the power cable away from the back of
the machine.
A damaged or cracked additional handle must be
replaced. Never operate a machine with a defec-
tive additional handle.
Dust from material such as paint containing lead,
some wood species, minerals and metal may be
harmful. Contact with or inhalation of the dust may
cause allergic reactions and/or respiratory
diseases to the operator or bystanders.
Certain kinds of dust are classified as carcinogenic
such as oak and beech dust especially in conjunc-
tion with additives for wood conditioning (chro-
mate, wood preservative). Material containing
asbestos must only be treated by specialists.
- Where the use of a dust extraction device is
possible it shall be used.
- The work place must be well ventilated.
- The use of a dust mask of filter class P2 is
recommended.
Follow national requirements for the materials you
want to work with.
See page 3.
1 Additional handle
2 Additional handle holder
3 Star knob for adjusting the clamping power of
the additional handle holder
4 Tool lock
5 Switch button
6 Thread for additional handle
7 Metabo VibraTech (MVT): integrated damping
system
8 Locking button for continuous activation
9 Trigger switch
10 Carbon brush service indicator (lamp signal
for pending carbon brush change)
11 Operating indicator (light signal for mains
power supply)
12 Switch for optional impact reduction when
working on soft materials
• Metabo VibraTech (MVT) vibration damper: a
spring-mounted counter-oscillating weight
reduces the vibrations by more than 30%
• Metabo VibraTech (MVT): integrated damping
system in the handles for reduced vibrations
and less stress on the hands
• Additional handle can be attached to the
housing at 3 different points
• Optional impact reduction of up to 30% for
working on softer materials such as brick
• Lockable switch for convenient operation
during continuous chiselling
• Electronic smooth start-up for precision drilling
• Low-weight cast magnesium gear housing
ensures excellent heat dissipation
• Service indicator e.g. for signalling pending
carbon brush changes and light signal for mains
power supply
Before plugging in, check to see that the
rated mains voltage and mains frequency,
as stated on the rating label, match with your
power supply.
Always use an extension cable with a minimum
diameter of 1.5 mm
2
. The extension cable must be
suitable for the machine power rating (see Tech-
nical Specifications). If using a roll of cable, always
roll up the cable completely.
7.1 Assembly / setting of additional handle
For safety reasons, always use the addi-
tional handle (1)supplied.
Option 1
Unscrew the star knob (3). Move the additional
handle to the required angle. Tighten the star knob
(3) firmly to secure the additional handle (1) prop-
erly.
The
additional handle
(1)
must be reliably
secured against turning. Check that the
knob is tight before using the machine.
If
required, tighten the star knob (3) again to
increase the clamping power.
Option 2
Upright working position for reduced stress on the
back when working on floors:
5Overview
6 Special Product Features
7 Commissioning
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Metabo KHE 76 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Metabo KHE 76 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info