Manual Metabo KHE 56 (page 12 of 84) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish)

595389

Zoom out

Zoom in

1/84

ENGLISH

ENG

7.1 Assembly of the bow handle or addi-

tional handle

For safety reasons, always use the bow

handle (2) or additional handle (3)

supplied.

MHE 56:

Release the clamping ring by turning the clamping

knob (1) anticlockwise. Adjust the bow handle (2)

to the required position and angle. Tighten the

clamping knob.

KHE 56:

Option 1

Open the clamping ring by turning the additional

handle (3) anticlockwise. Secure the additional

handle at the required angle. Tighten the additional

handle.

Option 2

Upright working position for reduced stress on the

back when working on floors

The additional handle (3) can also be attached to

the motor housing. Unscrew the additional handle

from the handle holder (4), insert in one of the

threads (9) (on the left and right of the motor

housing) by hand and tighten.

8.1 Adjusting the depth stop

(only for KHE

56)

Press and hold the clamp lever (5). Set the depth

stop (6) to the required drilling depth and release

the clamp lever.

8.2 Attaching and removing tools

Before fitting tools, clean shank and apply

special grease enclosed with tool (acces-

sories order no. 6.31800)! Use only SDS-max

tools.

Attaching tools:

Turn tool and insert until it engages. The tool is

automatically locked.

Pull on the tool to check that it is seated

correctly.

(It must be possible to move the

tool a few centimetres in an axial direction.)

Removing the tool:

Pull tool lock (7) backwards in direction indicated

by arrow (a) and remove tool (b).

8.3 Setting the operating mode

Turn the switch button (8) to select the desired

operating mode.

Hammer drilling (only for KHE 56)

Chiselling

When a chisel is fitted, only operate the

machine in the chiselling operating

mode

8.4 Adjusting the chisel position

The chisel can be secured in 12 different positions.

- Insert the chisel.

- Turn the switch button (8) to position .

- Turn the chisel to the required position.

- Turn the switch button (8) to position .

- Turn the chisel until it engages.

When a chisel is fitted, only operate the

machine in the chiselling operating

mode .

8.5 Adjusting the impact force

Slide the switch (15) to adjust the

impact force

(and speed)

setting.

Reduced impact force,

reduced speed

High impact force,

high speed

The correct setting depends on the task in hand.

Example: set the switch to "reduced impact force"

when working on soft, brittle material or trying to

minimise break-off.

Set the switch to "high impact force" when

working on harder materials.

8.6 Switching On and Off

Instantaneous activation:

To start the machine, press the trigger switch (12).

Release the trigger (12) to switch off.

Continuous operation:

For continuous operation, the trigger switch (12)

can be locked using the lock button (11).

Press and release the trigger (12) again to switch

off.

In continuous operation, the machine

continues running if it is forced out of your

hands. Therefore, always hold the machine

with both hands using the handles provided,

stand in a safe position and concentrate.

8.7 Metabo VibraTech (MVT)

For reduced vibrations and less stress on the

hands.

8Use

17026856_1014 KHE 56 MHE 56.book Seite 12 Montag, 27. Oktober 2014 4:56 16

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Metabo KHE 56 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 4,87 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Metabo KHE 56 Manual

Product: