Manual Metabo KHE 24 SP (page 14 of 96) (All languages)

625631

Zoom out

Zoom in

1/96

ENGLISH

ENG

Replacing the chuck:

Place chuck onto spindle (6) (a). Turn chuck lock

(5) in direction indicated by arrow (b) until chuck

slides fully onto the spindle, then release the chuck

lock.

Check to see that the chuck is properly seated.

Note:

To keep the spindle from turning while

changing chucks, set the control knob (16) to

chiselling.

8.7 Tool Change with SDS Chuck

Before fitting, clean tool shank and apply

special grease 6.31800! Use only

SDS-Plus tools!

Inserting the tool:

Turn the tool while inserting, until it engages. The

tool is automatically locked.

Removing the tool:

Turn tool lock (3) in direction indicated by arrow (a)

and remove the tool (b).

8.8 Tool change with Futuro Plus keyless

chuck

(not KHE 22 SP, KHE 24 SP,

KHE 26 SP, BHE 22, BHE 20 SP)

Use the keyless chuck when non-impact drilling in

metal, wood etc. and driving screws.

Insert tool. Grip the retaining ring (a) firmly and,

with the other hand, turn sleeve (b) towards "GRIP,

ZU", until the mechanical resistance which can be

felt is overcome.

Caution! The chuck is not yet fully tightened! Keep

turning (there is a "clicking" sound while turning),

until further turning is no longer possible - only now

is the tool securely tightened.

With a soft tool shank, retightening may be required

after a short period of operation.

Opening the drill chuck:

Grip the retaining ring (a) firmly and, with the other

hand, turn the sleeve (b) towards "AUF,

RELEASE".

Note:

The ratchet sound which can possibly be

heard after opening the drill chuck, is functional and

is switched off by a reverse rotation of the sleeve.

If the chuck is extremely tightened:

Unplug. Hold drill chuck with an open end spanner

at the flats on its head and turn the sleeve (b) hard

towards "AUF, RELEASE".

8.9 Contact mode

(KHE 26 Contact)

To enable the contact mode, press button (11).

If required, e.g. for drilling into steel girders or steel-

reinforced concrete walls, the contact mode can be

disabled by pressing the button (11).

The contact mode indicator (10) shows the current

setting:

Green: contact mode enabled.

Red: machine has switched off because contact

was made with conductive, earthed material or a

live supply cable.

Pull machine back and bit out of the hole

immediately. Have possible damage

properly repaired.

Off: contact mode disabled.

17026895_0308 BHE_Gu incl RU.book Seite 14 Montag, 31. März 2008 8:58 08

Hi i opened my Metabo KHE 24 SP drill and replaced the roller bearings now i cant get it assembled .
Do i have to remove the selector to get it assembled"? Submitted on 26-8-2020 at 18:20
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Metabo KHE 24 SP in the language / languages: All languages as an attachment in your email.

The manual is 4,38 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Metabo KHE 24 SP Manual

Product: