594938

Metabo KHA 18 LTX Manual

11
Zoom out
Zoom in
Previous page
1/68
Next page
ENGLISH en
11
Note: The machine will cool more quickly if you
operate it at idling speed.
3. Metabo safety shutdown: The machine was
SWITCHED OFF automatically. If the slew rate
of the current is too high (for example, if the
machine suddenly seizes or kickback occurs),
the machine switches off. Switch off the machine
at the trigger switch
(10). Switch it on again and
continue to work as normal. Try to prevent the
machine from seizing.
7.2 Depth Stop Setting
Loosen the additional handle (1). Set depth stop (4)
to the desired drilling depth and retighten additional
handle (1).
7.3 On/Off switch, setting the speed
Switching on, speed: press the trigger switch (10).
Press in the trigger to increase the rotational speed.
Switching off: Release the trigger switch (10).
7.4 Operating mode selection
Press the lock (6) and turn the thumbwheel (5).
Drilling
Hammer drilling
Chiselling
When a chisel is fitted, only operate the
machine in the chiselling operating mode .
Avoid levering with the machine.
7.5 Setting chisel position
- Insert the chisel.
- Turn the switch button (5) to position .
- Turn the chisel to the required position.
- Turn the switch button (5) to position .
When a chisel is fitted, only operate the
machine in the chiselling operating mode .
7.6 Set direction of rotation, transportation
safety device
(switch-on lock)
Do not activate rotation selector switch (9)
unless the motor has completely stopped!
Set the rotation selector switch (9).
See page 2:
R = clockwise rotation set (for drilling, hammer
drilling, chiselling, inserting screws)
L = anti-clockwise rotation set (for the removal of
screws)
0 = middle position: transportation safety device
(Switch-on lock) set
7.7 Tool change with SDS chuck
Before fitting, clean tool shank and apply
special grease (accessories order no.
6.31800)! Use only SDS-Plus tools.
Inserting tools:
Turn tool and insert until it engages. The tool is
automatically locked.
Remove the tool:
See page 2, fig. A.
Pull tool lock (2) backwards in direction indicated by
arrow (a) and remove tool (b).
The vent slots of the machine should be cleaned
periodically.
f
Use only genuine Metabo accessories.
Use only accessories which fulfil the requirements
and specifications listed in these operating
instructions.
Fit accessories securely. Secure the machine if it is
operated in a bracket. Loss of control can cause
personal injury.
See page 4.
AChargers
B Battery packs with different capacities.
Use battery packs only with voltage suitable for
your power tool.
CMetabo carrying strap
D Tools with SDS-Plus shank
EConnecting piece
FGeared chuck
G Twist drills for metal and wood
H Screwdriver bit
I Special grease (for lubricating the tool shanks)
J Dust extraction systems:
a) Adapter for vacuum cleaner
b) Dust extraction set 43/50 mm
c) Chip and dust extraction unit
For a complete range of accessories, see
www.metabo.com or the catalogue.
Repairs to electrical tools must be carried out by
qualified electricians ONLY!
Contact your local Metabo representative if you
have Metabo power tools requiring repairs. For
addresses see www.metabo.com.
You can download a list of spare parts from
www.metabo.com.
Do not allow battery packs to come into contact with
water!
Protect the environment, and do not dispose
of power tools and battery packs with house-
hold waste. Observe national regulations on
separated collection and recycling of disused
machines, packaging and accessories
.
8. Maintenance, cleaning
9. Accessories
10. Repairs
11. Environmental Protection
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Metabo KHA 18 LTX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Metabo KHA 18 LTX in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 8,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info