ENGLISHen
12
Original instructions
1. Declaration of Conformity
2. Specified Use
3. General Safety
4. Special Safety Instructions
5. Overview
6. Setup and transport
7. The device in detail
8. Commission
9. Operation
10. Care And Maintenance
11. Tips and Tricks
12. Accessories
13. Repairs
14. Environmental Protection
15. Troubleshooting
16. Technical Specific
We declare under our sole re
crosscut and mitridentified by type and
serial number *1), comply with all releva
requirements of the directives *2) and standards
*3). Technical file at *4) - see page 4.
The mitre saw is suited for longitudinal and cross
cuts, inclined cuts, me cuts and double mitre
cuts. Furthermore g
Only materials for which the re
is suited may be machined (approved saw blades
see chapter 12. Accessories).
The permissible dimensions of the s
be adhered to (see chapter 16. Technical
Specificat
Workpieces with
(such as firewood)not be cut, as they
cannot be he
process. When sawing a thin work
edge, a suitable guide must be used for firm
support.
Any other use does not comply
purpose. Unspecified use, modification of the tool
or use of parts that have not been tested and
approved by the manufacturer can cause
unforeseeable damage!
For your own and for the
protection of your electrical tool, pay
attention to all parts of the text that are
marked with this symbol!
WARNING – Reading the operating
instructions wil
Pass on your power tool only together with
these documents.
General Power Tool Safety Warnings
WARNING – Read all safety warnings and
all instructions. Failure to follow all sa
warnings and instruc
shock, fire and/or
Keep all safety instructions and information
for future refere The term "power tool" in the
warnings refers to your mains-operated (corded)
power tool or battery-ope
tool.
3.1 Work area safety
a) Keep work area clean and well lit. Untidy or
poorly lit workplaces can caus
b) Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or fumes.
c) Keep children and bystanders away wh
operating a power tool. Distractions can cause
you to lose control.
3.2 Electrical safety
a) Power tool plugs must match the outlet.
Never mo
any adapter plugs with earthed or grounded
power tools. Unmodified plugs and ma
outlets will reduce risk of electric shock.
b) Avoid body contact with earthed or
grounded surfaces, such as pipes, radiators,
ranges and refrigerators. There is an increased
risk of electric shock if your body is earthed or
grounded.
c) Do not expose power tools to rain or
conditions. Water entering a power tool will
increase the risk of electric shock.
d) Do not abuse the cord. Neve
for carrying, pulling or unplugging the power
tool. Keep cord away from heat, oil, sharp
edges or moving parts. Damaged or entangled
cords increase th of electric shock.
e) When operating a power tool o
an extension cord suitable for outdoor use.
Use of a cord suitable for outdoor use reduces the
risk of electric shock.
f) If operating a power tool in a damp location
is unavoidable, use a residual current circuit
breaker (RCCB). Use of a residual current circuit
breaker reduces the ri
3.3 Personal safety
a) Stay alert, watch what you are doing and
use common sense when operating a power
tool. Do not use a power
tired or under the influence of drugs, alcohol
or medication. A moment of inat
operating power tools may result in serious
personal injury.
b) Use personal protective equipment.
wear eye prot Protective equipment such
as dust mask, non-skid safety shoes, hard hat, or
hearing protection
will reduce personal i
c) Prevent unintentional starting. Ensure the
switch is in the off-position before connecting
to power source and/or battery pack, picking
up or carrying the tool. Carrying power tools with
your finger on the switch or energising power tools
that have the switch on invites accidents.
d) Remove any adjusting
turning the power t A wrench or a key left
attached to a rotating part of the power tool may
result in personal injury.
e) Do not overreach. Keep proper footing and
balance at all times.
This enables better control of the power tool in
unexpected situations.
f) Dress properly. Do not wear loose clothing
or jewellery. Keep your hair, clo
gloves away from moving parts. Loose clothes,
jewellery or l
parts.
g) If
dust extraction and collection facilities,
ensure these are connecte
used. Use of dust extraction can reduce dust-
related hazards.
h) Don't lull yourself into a false sense of
security and ignore th
power tools, even if you are familiar with the
power tool afte Failure to
observe the foll
serious injury or da
3.4 Use and handling the power tool
a) Do not force the power tool. Use the corre
power tool for your appl The correct
power tool will dob better and safer at the
rate for which it was designed.
b) Do not use the power tool if the
not turn it on and off. Any power tool that cannot
be controlled with the switch is dangerous and
must be repaired.
c) Disconnect the plug from the pow
and/or the battery pack from the power tool
before making any adjustments, changing
accessories, or storing power tools. Such
preventive safety measures reduce the risk of
starting the power tool accidentally.
d) When not in use, st
of the reach of children Do not allow
personnel to use the device un
already familiar with it or have read these
instructions. Power tool
hands of untrained users.
e) Maintain power tools and accessories
carefully. Check for misalignment or binding
of moving parts, breakage of parts and
other condition that may affect the power
tool's operation. If damaged, have the power
tool repaired before use. Many accident
caused by poorly maintained power tools
f) Keep cutting tools sharp and clean. Properly
maintained cutting tools wi
are less likely to bind and are easier to co
g) Use the power tool, accessories, to
etc. in acc
Take into consideration the working
conditions and tasks required. Use of the power
tool for operations different from those intended
could result in a hazardo
h) Keep the handles and handle surfaces
clean and free of oil and grease. Slippery
handles and handle surfaces do not
handling and control of the pow
unforeseen situations.
3.5 Use and handling cordless tools
a) Always charge the batteries only in
chargers recommendeby the manufacturer.
Chargers designed for a specific type of battery
may pose a fir
other battery types.
b) Use only the batteries provided for this
purpose in the power tools. Using other
batteries may cause injur
hazard.
c) When not in use, keep batteries away from
paper clips, coins, nails, screws or other small
metal objects that could bridge the contacts.
Short circuits between battery contacts can cause
burns or fir
d) Fluid may esc
inappropriately. Avoid all contact with this
fluid. In the event of accidental skin contact,
rinse the affected area thoroughly. If the fluid
enters your eyes, seek immediate medica
assistance. Escaping battery fluid can cause skin
irritation or burns.
e) Do not use damaged or modified batteri
Damaged or modified bat
unpredictably and lead to fire, explosion or ris
injury.
f) Do not expose the bry pack to fire or
excessive temperatures. Fire or temperatures
above 130 °C can cause an explosion.
g) Follow all instructio
never charge the battery or the cordless t
outside the temperatur
operating instructions. Incorrect charging
charging outside the permitted temp
may destroy the battery and increase the risk of
fire.
3.6 Service
a) Have your power tool servic
qualified technician using only original
replacement parts. This wi
safety of the power tool is maintained.
b)Never service Any
servicing of batteries
by the manufacturer or authorised custom
service points
3.7 Additional Safety Instructions
– These operating instruction
people with bas
handling machin
here. If you have had no experience with
machines of this k
under the supervision of people with
experienc
– The manufacturer be
caused by non-comple with these operating
instructions.
Informatio
designated as shown below:
Contents
1. Declaration of Conformity
2. Specified Use
3. General Safety Instructions
