Manual Metabo KE 3000 (page 4 of 32) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish)

600601

Zoom out

Zoom in

1/32

Declaration of Compliance

We declare under our sole responsibility:

These glue guns, identified by type and serial

number (KE 3000,18121..), comply with all

relevant requirements of the directives *2) and

standards *3). Technical file at *4) - see below:

EN 60335,

2006/95/EG, 2004/108/EG, 2011/65/EU

2014-10-27

Volker Siegle

Director Innovation, Research and Development

Responsible Person for Documentation

Metabowerke GmbH

Metabo-Allee 1, D-72622 Nuertingen, Germany

Specific Safety Rules

Before using this tool be

sure to carefully read

and completely

understand these instructions

for use. Keep all the documents

supplied with this tool in a safe

place and pass them on to the

new owner if you part with the

tool.

This hot-melt adhesive gun will

reach operating temperatures

around 200°C! Be careful –

there is a serious risk of getting

burned!

Use only original Metabo

accessories.

Nozzle set (comprising

threaded insert,

flat nozzle, and crevice nozzle)

Only change the nozzle when

the device has reached its

operating temperature. Be

careful – there is a serious risk

of getting burned! Wear

protective gloves or similar.

Before changing the nozzle,

withdraw the power plug from

the mains socket!

Do not store within the reach of

children.

We can only guarantee that this

device will function properly if

original Metabo and/or Pattex

hot-melt glue sticks are used.

This tool is not designed for use

by persons with physical,

sensory or mental disabilities,

or with insufficient experience

and/or knowledge, unless they

are supervised by a person

responsible for their safety, or

have received instructions on

how to use the tool by this

person.

Never allow children to use the

machine.

Children should be supervised

to ensure that they do not play

with the tool.

Utilisation

Attach the stand and insert a hot-melt glue stick.

Place the adhesive gun on its stand (a card -

board or wooden working surface may be

required). Insert the power plug into the mains

socket.

Allow the adhesive gun to heat up for

approximately seven minutes.

Trigger the feeder and apply the melted

adhesive to the materials to be bonded.

Original instructions

ENGLISH

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Metabo KE 3000 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2,85 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Metabo KE 3000 Manual

Product: