Manual Metabo HWW 9000-100 G (page 7 of 52) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish)

600820

Zoom out

Zoom in

1/52

ENGLISH en

Original instructions

Under our sole responsibility, we hereby declare

that these pumps/domestic water systems, identi-

fied by type and serial number *1), comply with all

relevant requirements of the directives *2) and

standards *3). Technical documents for *4) - see

Page 3.

This device is used for conveying clean water in

the house and garden area, for sprinkling and

watering, as a well pump, rain pump and domestic

water pump and for pumping out swimming pools,

garden ponds and water tanks.

The maximum permissible temperature of the

conveyed medium is 35 °C.

The device must not be used for drinking water

supply or for conveying food supplies.

Explosive, combustible, aggressive or other

substances that are harmful to health must not be

conveyed.

The device is not suitable for commercial or indus-

trial use.

This device is not designed for the use of persons

with limited physical, sensory or mental aptitude or

lack of experience and/or knowledge.

Children should be supervised to ensure that they

do not play with the device.

Unauthorised modifications to the device and the

use of parts that are not tested and approved by

the manufacturer are prohibited.

All improper use of the device is regarded as non-

specified use; this can result in unpredictable

damage! The user bears sole responsibility for any

damage caused by improper use.

Generally accepted accident prevention regula-

tions and the enclosed safety information must be

observed.

For your own protection and for the

protection of your device, pay attention

to all parts of the text that are marked

with this symbol!

WARNING – Reading the operating

instructions will reduce the risk of injury.

WARNING Read all safety warnings and

instructions. Failure to follow all safety

warnings and instructions may result in electric

shock, fire and/or serious injury.

Keep all safety instructions and information

for future reference.

Pass on your pump only together with these docu-

ments.

Information in these operating instructions is cate-

gorised as shown below:

Danger! Risk of personal injury or environ-

mental damage.

Risk of electric shock! Risk of personal

injury by electric shock.

Caution! Risk of material damage

Children, adolescents and per-

sons who are not familiar with the

operating instructions must not

used the device.

Never allow children to use the

machine.

Children should be supervised to

ensure that they do not play with

the tool.

When the pump is being used in

swimming pools and garden

ponds and in the protected areas

around them, the provisions of

DIN VDE 0100-702 and -738 must

be observed.

The device must be supplied via a

residual-current device (RCD)

with a rated residual current of

max. 30 mA.

The device must not be used if

there are persons in the water.

When used for domestic water

supply, the statutory water and

waste water specifications

according to DIN 1988 must be

observed.

The following residual risks

essentially remain when operating

pumps and pressure vessels can-

not be fully eliminated (depending

on features) – even if safety meas-

ures have been introduced.

4.1 Danger from the environ-

ment!

Do not expose device to rain. Do

not operate device in a damp or

wet environment.

Do not use the pump in hazardous

locations or near inflammable liq-

uids and gases!

4.2 Danger: Hot water!

Danger! Install a check valve

at the suction connection

(4)

to prevent water from flowing back

into the suction line. This can

reduce the following danger:

Hot water can cause damage and

leaks on the pump and the con-

nection lines, allowing hot water to

escape. Danger of scalding!

Devices with the designation

HWW...: If the shut-off pressure of

the pressure switch cannot be

reached due to poor pressure

conditions or a defective pressure

switch, the water can heat up

within the pump as a result of

internal circulation.

Devices with the designation P...:

Operate the pump a max. of 5 min-

utes against the closed discharge

line. Water that circulates inside

the device is heated up.

In the event of a fault, unplug the

pump from the power-supply sys-

tem and allow to cool. A specialist

must check the system to make

sure it is in perfect working order

before it can be used again.

4.3 Danger! Risk of electric

shock!

Never direct the water jet directly

at the device or other electrical

components! Risk of fatal electric

shock!

Prior to installation and mainte-

nance tasks, always disconnect

the device from the power-supply

system.

Do not touch the plug with wet

hands! To disconnect, always pull

on the plug, not the power cable.

Do not buckle, squeeze, drag or

drive over power cable or exten-

sion cables; protect from sharp

edges, oil and heat.

4.4 Danger due to device defi-

ciencies or malfunctions!

Before each use, check the

device for possible damage -

especially the mains cable, mains

plug and electrical components.

Risk of fatal electric shock!

A damaged device must only be

reused after it has been correctly

repaired.

Do not attempt to repair the pump

yourself! Only specialists are per-

mitted to repair pumps and pres-

sure vessels (depending on fea-

tures).

Caution! To prevent water

damage, e.g. flooded rooms,

caused by device malfunctions or

deficiencies:

- Introduce suitable safety meas-

ures, e.g.: alarm system or col-

lecting tank with monitor

The manufacturer is not liable for

any damage caused by:

- improper use of the pump;

- overloading of the pump through

continuous operation;

- failure to operate and store the

pump in a frost-free environment;

- unauthorised modification of the

pump (repairs to electrical equip-

ment may only be carried out by

qualified electricians!);

- use of spare parts which have

not been tested and approved by

the manufacturer; or

- use of unsuitable installation

materials (fittings, connection

lines etc.).

Suitable installation materials:

- pressure-resistant (min. 10 bar)

- heat-resistant (min. 100 °C).

1. Declaration of Conformity

2. Specified Use

3. General safety instructions

4. Special Safety Instructions

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Metabo HWW 9000-100 G in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 6,93 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Metabo HWW 9000-100 G Manual

Product: