Manual Metabo HWW 5500-50 M (page 10 of 68) (English, German, Dutch, Danish, French, Swedish, Spanish, Finnish)

600830

Zoom out

Zoom in

1/68

ENGLISH

1. Machine Overview.......................9

2. Please Read First! .....................10

3. Range of Application and

Pumping Media..........................10

4. Safety .........................................10

4.1 Specified conditions of use .........10

4.2 General safety instructions..........10

5. Prior to Operation .....................11

5.1 Installation...................................11

5.2 Suction line connection ...............11

5.3 Discharge hose connection.........11

5.4 Connection to a pipe system.......11

5.5 Mains connection ........................11

5.6 Filling the pump and priming .......11

6. Operation ...................................11

6.1 Commissioning............................11

6.2 Pump characteristic curve...........12

7. Care and Maintenance ..............12

7.1 Periodic maintenance..................12

7.2 Danger of freezing.......................12

7.3 Equipment dismounting and

storing .........................................12

8. Trouble Shooting ......................12

8.1 Fault finding.................................12

8.2 Pressure switch adjustment ........12

8.3 Increasing the air charge.............13

9. Repairs .......................................13

10. Environmental Protection ........13

11. Available Accessories .........13/66

12. Technical Specifications ..........14

• Read these instructions before use.

Pay special attention to the safety

instructions.

• Disregard of the operating instruc-

tions invalidates the manufacturer's

warranty; the manufacturer is not

liable for any damages resulting

from such disregard.

• If you notice shipping damage while

unpacking, notify your supplier

immediately. Do not operate the

machine!

• Dispose of the packing in an envi-

ronmentally friendly manner. Take

to a proper collecting point.

• Keep these instructions for refer-

ence on any issues you may be

uncertain about.

• If you lend or sell this machine be

sure to have the instructions go with

it.

This equipment is intended for pumping

clear water in domestic applications,

such as

− irrigation,

− well, rain and service water pump-

ing,

− draining of pools, garden ponds and

water tanks.

The max. permissible temperature of the

pumped medium is 35 °C.

4.1 Specified conditions of

use

This equipment must not be used to sup-

ply drinking water or for pumping food-

stuff.

Explosive, inflammable, aggressive flu-

ids or substances detrimental to health

and salt water must not be pumped.

This equipment is not suitable for com-

mercial or industrial use.

Alteration of the equipment or use of

parts not approved by the equipment

manufacturer is not permitted.

Any inexpert use the equipment is not as

specified; it can cause unforeseen dam-

age!

4.2 General safety instruc-

tions

Children, juveniles and persons not fam-

ilar with the instructions are not permit-

ted to operate the pump.

When used in swimming pools and gar-

den ponds and their range of protection,

the regulations according to DIN VDE

0100 -702, -738 are to be observed.

When used as domestic water supply

any applicable local regulations pertain-

ing to water supply and waste water dis-

posal, plus DIN 1988 (where applicable)

are to be observed.

The following residual risks do principally

exist when operating pumps and pres-

sure vessels and can not be fully elimi-

nated – even by employing safety

devices.

Hazard by ambient conditions!

Do not expose to rain. Do not operate in

damp or wet environment.

Do not direct water jet directly against

the equipment or other electrical parts!

Risk of fatal electric shock!

Do not use the pump in hazardous loca-

tions or near inflammable liquids and

gases!

Danger: Hot water!

If the shut-off pressure of the pressure

switch cannot be reached due to poor

pressure conditions or a defective pres-

sure switch the water can heat up within

the pump as a result of internal circula-

tion.

Through this the pump and the connec-

tion lines can become damaged or

leaky, allowing hot water to escape.

Danger of scalding!

• Do not operate the pump against a

closed pressure line for longer than

5 minutes.

• Unplug the pump and allow to cool.

A specialist must check the system

to make sure it is in perfect working

order before it can be used again.

Danger! Risk of electric shock!

Always unplug before servicing.

Do not touch the plug with wet hands! To

unplug always pull on the plug, not the

power cable.

Do not buckle, squeeze, drag or drive

over power cable and extension cables;

protect from sharp edges.

Danger by pump failings!

Before each use check the equipment,

especially the power cable, plug and

electrical parts for possible damage.

Risk of fatal electric shock!

A damaged pump must be workmanlike

repaired before it can be used again.

Do not attempt to repair the equipment

yourself! Only trained specialists are

permitted to service or repair pumps or

pressure vessels.

Caution!

To avoid water damage, e.g.

flooded rooms, caused by pump mal-

functions or defects:

• provide for suitable safety measures

such as the following:

− alarm or

− collection tank with monitoring.

The manufacturer is not liable for any

damage caused by:

− improper use of the pump;

− overloading of the pump through

continous operation;

− failure to operate and store the

pump in a frost-free environment;

− unauthorised modification of the

pump (repairs to electrical equip-

ment may only be carried out by

qualified electricians!);

− use of spare parts which have not

been tested and approved by the

manufacturer; or

− use of unsuitable installation materi-

als (fittings, connection lines etc.).

Table of Contents

2. Please Read First!

3. Range of Application and

Pumping Media

4. Safety

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Metabo HWW 5500-50 M in the language / languages: English, German, Dutch, Danish, French, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 5,85 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Metabo HWW 5500-50 M Manual

Product: