Manual Metabo HWW 5500-20 M (page 13 of 68) (English, German, Dutch, Danish, French, Swedish, Spanish, Finnish)

600831

Zoom out

Zoom in

1/68

ENGLISH

Caution!

The factory-set cut-out pres-

sure must not be exceeded.

4. To change the cut-out pressure, turn

nut (12)

− clockwise to increase the cut-out

pressure;

− counter-clockwise to decrease

the cut-out pressure.

5. To change the cut-in pressure, turn

nut (13)

− clockwise to increase the cut-in

pressure;

− counter-clockwise to decrease

the cut-in pressure.

6. If necessary, repeat steps 2. to 5.

until the desired values are set.

7. Put the pressure switch cover back

on.

8.3 Increasing the air charge

If – during time – the pump starts after a

minimal amount of water (approx. 0.5 l)

is drawn off, the tank's air charge must

be increased.

Note:

The air charge pressure can not

be taken from the pressure gauge.

1. Unplug.

2. Open pressure line (open tap or

spray nozzle) and drain water com-

pletely.

3. Remove plastic cover from front of

tank to have access to the air charg-

ing valve.

4. Put air pump or air hose with tire

chuck and pressure gauge on the air

charging valve.

5. Pump up to the rated air charge

pressure (see "Technical Specifica-

tions").

6. Reconnect equipment and check for

proper functioning.

Danger!

Repairs to electric tools must

only be carried out by a qualified

electrician!

Electric tools in need of repair can be

sent to an authorised service center in

your country. See spare parts list for

address.

Please attach a description of the fault to

the electric tool.

For shipping:

• Drain pump and tank completely

(see "Equipment dismounting and

storing").

• Uninstall pressure switch and pres-

sure gauge (to prevent shipping

damage).

• Ship equipment in original packing,

if possible.

The packaging of the pump can be

100 % recycled.

Worn out power tools and accessories

contain considerable amounts of valua-

ble raw and plastic materials, which can

be recycled.

These instructions are printed on chlo-

rine-free bleached paper.

For this equipment the following acces-

sories are available at specialist dealers.

Note:

Illustrations and stock numbers

can be found at the end of these instruc-

tions.

A Pump Installation Package,

complete with double nipple, check

valve, pipe nipple 150 mm (2 pcs.),

filter long, washable filter cartridge,

spiral hose assembly 1 m, elbow,

hose bib with ball valve, thread

sealing tape.

B Dry-running Stop Switch,

with 10 m cable, keeps the pump

from running dry when pumping

from tank, pool, etc.

C Spiral Hose 1"

1) 1 m assembly, with quick

release screw fitting at both

ends;

2) 4 m, complete with quick

release screw fitting and

strainer with foot valve;

3) 7 m, complete with quick

release screw fitting and

strainer with foot valve.

D Filter, 1" connection, long,

complete with washable plastic fil-

ter cartridge.

E Disposable Filter Cartridge, long,

for mechanical preliminary filtering

of sand.

F Washable Filter cartridge, long,

for mechanical preliminary filtering

of sand, reusable.

G Activated Carbon Filter Cartridge,

long,

for use with chlorous water,

removes odours or discolouring.

H Filter Cartridge Poly, long,

filled with Polyphosphate, for calcif-

erous water supplied to water heat-

ers.

I Pipe Nipple 150 mm, 1" male at

both ends, galvanized, to connect

pump and filter.

J Double Nipple, 1" male at boths

ends.

K Check Valve 1" female, prevents

water backflow and pump running

dry.

L Thread Sealing Tape, 12 m roll.

1213

9. Repairs

10. Environmental Protection

11. Available Accessories

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Metabo HWW 5500-20 M in the language / languages: English, German, Dutch, Danish, French, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 5,85 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Metabo HWW 5500-20 M Manual

Product: