471768

Metabo HS 8000 D combi Manual

11
Zoom out
Zoom in
Previous page
1/56
Next page
11
ENGLISH
1. Machine overview.....................10
2. Please read first!.......................11
3. Safety.........................................11
3.1 Specified conditions of use.........11
3.2 General safety instructions .........11
3.3 Safety devices ............................11
3.4 Symbols on the machine ............12
3.5 Symbols used throughout
these instructions........................12
4. Special product features..........12
5. Transportation and
installation.................................12
5.1 Machine installation ....................12
5.2 Attach guard rail..........................12
5.3 Screw in the oil filler cap .............12
5.4 Power connection .......................13
5.5 Initial operation ...........................13
6. Operation...................................13
6.1 Splitting.......................................14
6.2 Changing the start position
of the splitting knife.....................14
7. Care and maintenance .............14
7.1 Cleaning the oil filter /
Changing the hydraulic oil ..........15
7.2 Machine storage .........................15
7.3 Maintenance ...............................15
8. Available accessories .........15/55
9. Repairs.......................................15
10. Trouble shooting ......................15
11. Technical specifications .......... 16
• Read these instructions before initial
operation. Pay special attention to
the safety instructions.
• If you notice transport damage while
unpacking, notify your supplier
immediately. Do not operate the
machine!
• Dispose of the packing in an envi-
ronmentally friendly manner. Take
to a proper collecting point.
• Keep these instructions for refer-
ence on any issues you may be
uncertain about.
• When you hire or sell the machine,
have all documents supplied go with
it.
3.1 Specified conditions of
use
This machine is only intended for split-
ting firewood as detailed in these instruc-
tions. Any other use is not as specified.
Unspecified use, modifications to the
machine, or use of parts not tested and
approved by the equipment manufac-
turer may cause unforeseeable damage!
This machine is intended for operation
by one person. Other persons shall keep
a sufficient distance to the machine.
Observe the permissible dimensions of
logs to be cut (see "Technical specifica-
tions").
Do not overload machine – use it only
within the performance range it was
designed for (see "Technical specifica-
tions").
3.2 General safety instruc-
tions
When using this machine, observe the
following safety instructions to exclude
the risk of personal injury or material
damage.
Please also observe the special safety
instructions in the respective chapters.
Where applicable, follow the legal direc-
tives or regulations for the prevention of
accidents pertaining to the use of log
splitters.
A
General hazards!
Be alert. Know what you are doing. Be
sure you are capable of doing this type
of work. Do not operate machine while
under the influence of drugs, alcohol or
medication.
Keep your work area tidy – a messy
work area invites accidents. Regularly
clear the work area of split wood.
Prevent adverse body positions. Ensure
firm footing and keep your balance at all
times.
Consider environmental conditions:
Only work in a well-lighted area.
Do not operate machine near inflamma-
ble liquids or gases.
This machine shall only be started and
operated by a person familiar with log
splitters and who is at all time aware of
the dangers associated with the use of
such a machine.
Keep bystanders, particularly children,
out of the danger zone. Persons under
18 years of age shall use this machine
only in the course of their vocational
training, under the supervision of an
instructor.
Do not permit other persons to touch the
machine or power cable while it is run-
ning.
B
Danger! Risk of electric shock!
To ensure that the machine remains
weatherproof, before any use check to
see that switch, power cable and plug
are not damaged (no splits, cracks, etc.)
Do not use the power cable for any pur-
pose it is not intended for (power cable is
not included with this machine).
A
Risk of personal injury and
crushing by moving parts!
Do not operate the machine without
installed guards.
Keep sufficient distance to driven com-
ponents when operating the machine.
Ensure the machine is disconnected
from power supply before servicing.
Ensure that when switching on (e.g. after
servicing) no tools or loose parts are left
on or in the machine.
Turn power off if the machine is not
used.
A
Hazard generated by modifica-
tion of the machine or use of parts
not tested and approved by the equip-
ment manufacturer!
Use only parts approved by the equip-
ment manufacturer. This applies particu-
larly to:
− Hydraulic lines (see "Spare parts
list" for stock numbers);
− Safety devices (see "Spare parts
list" for stock numbers).
Do not change any parts.
A
Hazard generated by machine
defects!
Keep machine and accessories in good
repair. Observe the maintenance
instructions.
Check tool for possible damage before
any use: before operating the tool all
safety devices, protection devices or
slightly damaged parts must be
inspected for proper functioning as spec-
ified. Check to see that all moving parts
work properly and do not jam. All parts
must be correctly installed and meet all
conditions necessary for the proper
operation of the machine.
Damaged protection devices or parts
must be repaired or replaced by a quali-
fied specialist. Have damaged switches
replaced by a service centre. Do not use
this machine if the switch cannot be
turned ON or OFF.
Keep handles free of oil, grease and
resin.
3.3 Safety devices
Safety valve
The safety valve prevents motor dam-
age caused by overload when the split-
ting knife is blocked or jammed. The
safety valve is sealed and must never be
tampered with. Do not attempt to adjust
it.
No-voltage release
The no-voltage release feature prevents
the machine from starting up when the
power is restored after a power failure.
Table of Contents
2. Please read first!
3. Safety
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Metabo HS 8000 D combi at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Metabo HS 8000 D combi in the language / languages: English, German, Dutch, Danish, French, Italian, Spanish as an attachment in your email.

The manual is 3,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info