451433
12
Zoom out
Zoom in
Previous page
1/52
Next page
12
ENGLISH
Two-hand operation
Two-hand operation ensures that the
splitting knife travels downward only
when both operating levers are simulta-
neously pressed down.
Protective hose sleeve
The hose sleeve prevents oil from spray-
ing out from damaged hydraulic lines
and causing injury.
3.4 Symbols on the machine
A
Danger!
Disregard of the following
warnings could lead to severe per-
sonal injury or material damage.
Caution!
Moving parts.
Read these instructions
before initial operation.
Danger of personal
injury. Body parts and
clothing can be caught
by moving parts.
When operating this
splitter, do not place
your hands under the
splitting knife.
Protect your feet from
falling pieces of wood.
Do not remove or disa-
ble safety devices.
Do not clean, service or
adjust this machine dur-
ing operation.
Risk of electric shock!
Wear protective gloves.
Wear non-slip safety
shoes.
Wear hearing protection.
This machine is intended
for operation by one per-
son only.
Maximum length of
wood: 548 mm
Cleaver's maximum
travel through wood:
493 mm
3.5 Symbols used through-
out these instructions
A
Danger!
Indicates risk of personal
injury or severe material dam-
age.
B
Risk of electric shock! Risk of
personal injury by electric
shock.
A
Caution!
Risk of material damage.
3
Advisory note:
Supplementary information.
Robust welded steel construction for
maximum torsional stability.
Two-hand control for safe operation.
6 tons of ram force.
Wheel set for easy moving.
5.1 Machine installation
A
Danger!
This machine shall only be
operated at a location meeting the fol-
lowing conditions:
level, non-slip ground
All four of the machine's legs
must stand on firm, level ground
1. Transport the machine on the pallet
to a suitable location.
2. Remove packing and enclosed
parts.
3. Lift machine off the pallet.
5.2 Screw in the oil filler cap
To prevent oil from leaking out during
transport, the oil filler cap is replaced by
a temporary shipping cover sealed with
a gasket. Before using the machine for
the first time, be sure to replace the tem-
porary shipping cover with the oil filler
cap.
Retain the shipping cover and gasket for
use during later transport.
1. Unscrew the shipping cover (12)
and install the oil filler cap (11).
5.3 Power connection
B
Danger! High voltage
Operate the machine only on a
power source matching the following
requirements (see also "Technical
specifications"):
Outlets with neutral wire, being
properly installed, grounded and
tested.
Mains voltage and frequency
must conform with the data
stated on the machine's name-
plate.
Fuse protection by a residual cur-
rent device (RCD) of 30 mA fault
current sensivity.
System impedance Z
max.
at the
interconnection point (house
service connection) 0.35 Ohm
maximum.
4. Special product features
5. Transportation and
installation
11
12
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Metabo HS 6000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Metabo HS 6000 in the language / languages: English, German, Dutch, Danish, French, Italian, Spanish as an attachment in your email.

The manual is 4,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info