451429
16
Zoom out
Zoom in
Previous page
1/56
Next page
ENG
Application
This wood turning lathe is designed for turning all kinds and species of wood or derived wood products.
- The practical design and the range of optional accessories maximize the potential and versatility of your lathe.
-Machining of metals is not permitted on this woodturning lathe.
- The recommended spindle speeds should not be exceeded (see section 18.0 of this manual).
- Observe the safety information and operating instructions provided in this manual, to prevent accidents and
personal injury.
2 Standard Delivery
4 prong centre, face plate ¥150 mm, revolving centre No. 3 Morse Taper, tool rest, tool set, instructions.
User Responsibility
This machine will perform in conformity with the description contained in the instructions provided. This machine
must be checked periodically. Defective equipment (including power cables) should not be used. Parts that are
broken, missing, obviously worn, distorted or contaminated, should be replaced immediately. Should such repair
or replacement become necessary, it is recommended that such repairs are carried out by qualified persons
approved by metabo or its representatives.
This machine or any of its parts should not be altered or changed from standard specifications. The user of this
machine shall have the sole responsibility for any malfunction which results from improper use or unauthorized
modification from standard specifications, faulty maintenance, damage or improper repair by anyone other than
qualified persons approved by metabo or its representatives.
Note! The information contained in this manual is intended to make the owner/operator of this woodturning lathe
familiar with its safety features, settings and use of accessories. It does not teach the operator how to become
an expert woodturner.
Contents
1 Specifications 12 3-/4-Jaw Chuck
2 Standard Delivery 13 Boring Tool
3Commissioning 14 Long Hole Boring
4 Connection to Power Mains 15 Steadying Rest
5 Safety Information 16 Copying Attachment
6 Overview of Components 17 Disc Sanding Attachment
7 Head-/Tailstock 18 Recommended Spindle Speeds
8 Optional Accessories 19 Tools
9 Turning between Centres 20 Assembly of Workstand
10 Faceplate Turning 21 Spare Parts List
11 Socket Chucks 22 Electrical Wiring Diagram
1 Specifications
Motor capacity 0.45 kW S1 - 100% duty cycle
Rated voltage 220-240 V AC 50/60 Hz
Motor speed 50/60 Hz 1350/1620 min-1
Spindle speeds 50 Hz 350/550/800/1100 min-1
Spindle speeds 60 Hz 420/660/960/1320 min-1
Capacity between centres 1000 mm
Spindle height from bed 190 mm
Max. workpiece diameter 380 mm
Headstock spindle thread M 20x1.5
Tailstock centre sleeve No. 3 Morse Taper
Tailstock centre sleeve travel 50 mm
Max. workpiece weight 9.0 kg
Machine weight 34 kg
Workplace related noise emission value Lp according to DIN 45635, part 1651, idling: 75 dB(A)
16
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Metabo HDM 1000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Metabo HDM 1000 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info