Manual Metabo GB 18 LTX BL Q I (page 13 of 80) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish)

665602

Zoom out

Zoom in

1/80

ENGLISH en

- Do not direct the escaping particles and the

exhaust air stream at yourself or nearby persons

or on dust deposits.

- Use an extraction unit and/or air purifiers.

- Ensure good ventilation of the workplace and

keep clean using a vacuum cleaner. Sweeping or

blowing stirs up dust.

- Vacuum or wash the protective clothing. Do not

blow, beat or brush.

Transport of li-ion battery packs:

The shipping of li-ion battery pack is subject to laws

related to the carriage of hazardous goods (UN

3480 and UN 3481). Inform yourself of the currently

valid specifications when shipping li-ion battery

packs. If necessary, consult your freight forwarder.

Certified packaging is available from Metabo.

Only send the battery pack if the housing is intact

and no fluid is leaking. Remove the battery pack

from the machine for sending. Prevent the contacts

from short-circuiting (e.g. by protecting them with

adhesive tape).

Illustrations are provided at the beginning of the

operating instructions.

Symbol explanation:

Movement direction

Drill bit

Slow

Fast

First gear

Second gear

Screws

Drilling, screwing

Thread tapping

Torque

Fig. A

1 Keyless chuck

2 Additional handle

3 Slide switch (drilling, threadtapping)

4Gear switch

5 Rotation selector switch (rotation setting,

transport lock) - both sides of the machine

6Bit depot *

7Belt hook *

8 Battery pack release button

9 Capacity indicator button

10 Capacity and signal indicator

11 Battery pack

12 Setting wheel (pulse function, torque control,

max. torque)

13 LED light

14 Trigger switch

*equipment-specific

7.1 Battery pack, capacity and signal

indicator Fig. B

Charge the battery pack before use.

Recharge the battery pack if performance dimin-

ishes.

The ideal storage temperature is between 10°C and

30°C.

7.2 Removing and inserting the battery pack

Fig. C

7.3 Setting the direction of rotation,

engaging the transporting safety device

(switch-on lock) Fig. D

7.4 Select the gear Fig. E

Do not set the gear switch (4) unless the motor

has stopped completely!

7.5 Set drill, thread tapping Fig. A

Activate slide switch (3).

Note

: To screw the sliding switch (3) select the

"Drill" position.

7.6 Setting torque control, maximum torque,

pulse function

Do not work for long periods with pulse

function switched on! (The motor can

overheat.)

Fig. F

Set the desired operating mode at the setting wheel

(12):

= Pulse function

1...10 = Torque control

= maximum torque

Note:

Pulse function is only available when sliding

switch (3) is set to "Drill".

7.7 Switching On/Off, setting the speed

Fig. A

Switching on, speed: press the trigger switch (14).

Press in the trigger switch to increase the

rotational speed.

Switching off: release the trigger switch (14). Note:

the noise that the machine makes when it

switches off is due to the design (quick stop)

and has no influence on the function or the

service life of the machine.

7.8 Keyless chuck Fig. H

With a soft tool shank, retightening may be required

after a short drilling period.

Cleaning: from time to time, hold the machine

vertically with the chuck facing downwards and

turn the sleeve fully in the direction "GRIP, ZU"

5. Figures

6. Overview

7. Use

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Metabo GB 18 LTX BL Q I in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 11,99 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Metabo GB 18 LTX BL Q I Manual

Product: