658069

Metabo E 140 SP Manual

8
Zoom out
Zoom in
Previous page
1/39
Next page
8
ENGLISH
Information on the name plate:
4.1 Placing the machine
A
Caution!
Always stand the machine on
its feet only.
The machine draws in air at its front
and bottom, which is given off
through the ventilating slots at the
rear. Ensure an unhindered airflow.
The distance of the machine to walls
or other equipment must be at least
20
cm.
A
Caution!
Check all connections and
supply lines before turning on.
3
Note:
For manual arc welding this
machine uses the Hot-start, Arc-force
and Anti-stick functions.
Hot-start function
When contacting the weld metal with the
electrode, the set welding current is
increased for a short period to ensure
that the arc will start.
This brief increase of the welding current
is limited to the maximum electrode cur
-
rent.
Arc-force function
During the welding process the machine
keeps the energy (heat) brought into the
weld metal at a constant level, even if
the distance between electrode and
weld pool varies.
Anti-stick function
If the machine detects a short-circuit in
the welding process, it will switch to min-
imum current within 0.5 sec to keep the
electrode from burning out.
5.1 Manual arc welding
1. Connect the earth cable to the –
pole.
2. Connect the welding cable to the +
pole.
A
Caution!
Note information on polarity
shown on the packaging of the elec-
trodes used; reverse polarity, if nec-
essary.
A
Caution!
For manual arc welding the
Lift-arc ignition must be disabled (not
applicable for E 140 SP/Plus). To
check, turn the rotary switch counter-
clockwise.
3. Attach earth cable at a suitable loca-
tion of the workpiece.
4. Turn master switch ON.
5. Set desired welding current.
The welding machine is now opera-
tional.
5.2 TIG welding
When using a TIG welding torch
(optional accessory), both models can
also be used for TIG welding.
1. Connect the welding current cable
of the TIG torch
(– pole).
2. Check the gas supply to the TIG
torch.
3. Attach the earth cable at a suitable
location of the workpiece (+
pole).
4. Turn master switch ON.
5. Set desired welding current.
6. Activate Lift-arc ignition.
(not applicable for E 140 SP/Plus)
To check, turn the rotary switch
clockwise.
The welding machine is now opera-
tional.
TIG welding
The arc can only be started by touching
the workpiece with the electrode (Lift-arc
ignition).
1 Manufacturer
2 Machine designation
3 Serial number
4 Standard information – This
machine meets the requirements
of the standards mentioned
5 CE mark – This machine con-
forms to EC directives as per
declaration of conformity
6 Waste disposal symbol – the
machine can be disposed of
through the manufacturer
7 Electrical performance data
8 Date of manufacture
3. Operating Elements
9 Welding current regulator
10 E 130, E 150, E 170 Si
Carrying strap/shoulder strap
Adjustable in length for carrying
− by hand (shown in illustra-
tion)
− on the shoulder.
E 140 SP/Plus : carrying handle
2
345
7
8
1
6
9
11
10
12
13
14
15
16
11 Master switch
switches the unit ON or OFF
12 Equipment-on indicator light
13 Fault indicator light
The LED flashes:
− in case of a low-voltage
condition
− in case of an over-voltage
condition
− in case of excessive an
operating temperature.
14 Selector switch
Manual Arc MMA – TIG DC
(lift-arc ignition)
(not applicable for E 140 SP/Plus)
15 Welding current socket (+ pole)
16 Welding current socket (– pole)
LED = Light-Emitting Diode, used as
indicator light.
4. Preparing for Operation
5. Operation
>20 cm
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Metabo E 140 SP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Metabo E 140 SP in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Spanish, Norwegian as an attachment in your email.

The manual is 2,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info