511061
15
Zoom out
Zoom in
Previous page
1/100
Next page
ENGLISH
15
ENG
- Remove adjusting nut (2) with open-ended
spanner.
Caution! Left-hand thread on left machine
side
, i.e. to release the adjusting nut (2)on the left
machine side, turn clockwise!
- Remove clamping flange (3) and grinding
wheel (4).
- Secure new grinding wheel (4) in the reverse
order.
- Remount the safety cover (1). Tighten screws.
- Adjust the spark deflector (10) and workpiece
support (8) as described in chapter 8.2 and 8.1.
Replacing the wet grinding wheel
(TNS 175 only)
:
- Empty the water container (18): hold a collecting
pan under the container and remove the rubber
stopper (19). Re-insert the rubber stopper.
- Loosen the 3 screws (17) adequately and lower
the water container.
- Using one hand, hold the grinding wheel (4)
secure.
Caution! Risk of injury! Wear protec-
tive gloves!
- Remove adjusting nut with open-ended spanner.
(Loosen by turning anti-clockwise).
- Remove clamping flange and grinding wheel (4).
- Secure new grinding wheel (4) in the reverse
order.
- Replace the water container (18). (17) Tighten
screws. Fill the water container with the correct
amount of water (see chapter 8.5)
9.2 Replacing the sanding belt (BS 175
only)
Remove the side sanding belt cover (16): release
the 2 screws (13), slide the sanding belt cover (16)
(bayonet catch) and remove.
Swivel out lever (12) as far as it will go. This relieves
sanding belt tension and it can now be removed
from the rollers.
Place the new sanding belt on the rollers so that its
direction of circulation (arrows on the inside of the
sanding belt) matches the arrow (15) (16)on the
side sanding belt cover.
Return the lever (12) to the original position to
tension the sanding belt.
Place the side sanding belt cover (16) on the 2
screws (13) and slide (bayonet catch). Tighten the
two screws.
Adjust the belt run (see chapter 8.6).
For sanding belts, see Accessories chapter 10.
9.3 Water container (TNS 175 only)
Regularly replace the water in the water container
(18). To do this, hold a collecting pan under the
container and remove the rubber stopper (19).
Dismantle the water container for cleaning
purposes, as described in chapter 9.1. Use water
and a brush (no metal bristles) to clean the inside
of the container.
a
Use only genuine Metabo accessories.
If you need any accessories, check with your
dealer.
For dealers to select the correct accessory, they
need to know the exact model designation of your
power tool.
A Grinding wheels ..................... Order No.:
D= 125 mm:
36 P: .................... 0900025181
60 N: .................... 0900025190
D= 150 mm:
36 P:........................... 6.30632
60 N:........................... 6.30633
D= 175 mm:
36 P: ........................... 6.30657
60 N: ........................... 6.30656
D= 200 mm:
36 P: ........................... 6.30784
60 N: ........................... 6.30785
D= 250 mm:
36 P: ........................... 6.30636
60 N: ........................... 6.30637
Wet grinding wheel
D= 200 mm: .................... 0900025653
BStand
Order No.: ................................ 6.23867
C Wall bracket
Order no.: .......................... 6.23862
D Sanding belts
3 x P 40 .............................. 0900025777
3 x P 60 .............................. 0900025688
3 x P 80 .............................. 0900025696
3 x P 100 ............................ 0900025785
3 x P 120 ............................ 0900025700
3 x P 180 ............................ 0900025807
3 x P 240 ............................ 0900025823
3 x P 400 ............................ 0900025840
For a complete range of accessories, see
www.metabo.com or the main catalogue.
10 Accessories
17026975_0611 DS DSD TNS BS.book Seite 15 Dienstag, 21. Juni 2011 1:48 13
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Metabo DSD 250 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Metabo DSD 250 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 4,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info