Manual Metabo BS 18 LT Quick (page 11 of 60) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish)

594946

Zoom out

Zoom in

1/60

ENGLISH en

Fig. A

1 Keyless chuck

2 Sleeve (torque, drilling, impact drilling)*

witch (1st/2nd gear)

4 Rotation selector switch (rotation setting,

transport lock) - both sides of the machine

5Bit depot *

6Belt hook *

attery pack release button

8 Capacity indicator button

9 Capacity and signal indicator

Battery pack

11 LED lights

12 Trigger switch

*equipment-specific

7.1 Battery pack, capacity and signal display

Fig. B

Charge the battery pack before use.

If performance diminishes, recharge the battery

pack.

The ideal storage temperature is between 10°C and

30°C.

7.2 Removing, replacing battery pack

Fig. C

7.3 Setting direction of rotation, transporting

safety device (switch-on lock) Fig. D

7.4 Selecting gear stage Fig. E

Do not set the switch (3) unless the motor has

stopped completely!

7.5 Setting torque limitation,

drilling, impact drilling Fig. F

7.6 Switching on/off, setting speed

Fig. A

Switching on, speed: press the trigger (12). The

speed can be changed by pressing in the

trigger.

Switching off: release the trigger (12). Note:

The

noise that the machine makes when it switches

off is due to the design (quick stop) and has no

influence on the function or the service life of

the machine.

7.7 Keyless chuck Fig. G

With a soft tool shank, retightening may be required

after a short period of operation.

Notes on

machines with the designation SB...

1. The ratchet sound which can possibly be heard

after opening the drill chuck is functional and is

switched off by a reverse rotation of the sleeve.

2. Clamping tool:

Turn sleeve in direction "GRIP, ZU" until the

noticeable mechanical resistance has been

overcome.

Caution! The chuck is not yet fully tight-

ened! Keep turning the sleeve (it must "click"

when turning)) until it cannot be turned any

further - only now is the tool safely clamped.

Cleaning: From time to time, hold the machine

vertically with the keyless chuck facing

downwards and turn the sleeve fully in direction

"GRIP, ZU" and then turn fully in direction

"AUF, RELEASE". The dust collected falls from

the keyless chuck.

7.8 Unscrewing chuck Fig. H

Employ the same procedure when attaching the

chuck, except in reverse order.

7.9 Chuck with quick bit change system (for

BS 14.4 LT Quick, BS 18 LT Quick)

Fig. I

To remove: Push the interlock ring forward (a),

advance and pull off the chuck (b).

To mount: Push the interlock ring forward and

move the chuck as far as the limit stop on the drill

spindle.

7.10 Attaching the belt hook (depending on

machine features)/bit depot (depending

on machine features) Fig. J

Attach the belt hook to the left (6), as shown.

Attach the bit depot to the right (5), as shown.

8.1

The machine's multifunctional monitoring

system

If the machine switches off automatically, the

machine electronics have activated automatic

protection mode. A warning signal sounds (contin-

uous beeping). The beeping stops after a maximum

of 30 seconds or when the trigger (12) is released.

In spite of this protective function, overloading

is still possible with certain applications and

can result in damage to the machine.

Causes and remedies:

1. Battery pack almost empty Fig. A, B (The

electronics protect the battery pack against

damage through total discharge).

If one LED is flashing (9), the battery pack is

almost flat. If necessary, press the (8) button

and check the LEDs (9) to see the charge level.

If the battery pack is almost flat, it must be

recharged.

2. Long continuous overloading of the machine will

activate the temperature cut-out.

Leave the machine or battery pack to cool.

Note:

If the battery pack feels very warm, the

pack will cool more quickly in an "AIR COOLED"

charger.

6. Overview

7. Use

8. Troubleshooting

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Metabo BS 18 LT Quick in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 8,81 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Metabo BS 18 LT Quick Manual

Product: