Manual Metabo BE 75-X3 QUICK (page 7 of 47) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish)

595153

Zoom out

Zoom in

1/47

ENGLISH en

Original instructions

1. Declaration of Conformity

We, being solely responsible, hereby declare that

these drills, identified by type and serial number *1),

meet all relevant requirements of directives *2) and

standards *3). Technical documents for *4) - see

page 3.

2. Specified conditions of use

The drill is suitable for non-impact drilling into metal,

wood, plastic and similar materials. It is also suit-

able for thread tapping and screwdriving.

The user bears sole responsibility for any damage

aused by improper use.

Generally accepted accident prevention regula-

tions and the enclosed safety information must be

served.

3. General safety instructions

For your own protection and for the

protection of your power tool, pay atten-

tion to all parts of the text that are marked

with this symbol!

WARNING – Reading the operating instruc-

tions will reduce the risk of injury.

WARNING Read all safety warnings and

instructions. Failure to follow all safety warn-

ings and instructions may result in electric shock,

re and/or serious injury.

Keep all safety instructions and information for

ture reference.

Pass on your electrical tool only t

ogether with these

documents.

4. Special Safety Instructions

Use the additional handle supplied with the

tool. Loss of control can cause personal injury.

Hold the power tool by the insulated gripping

urfaces when performing an operation where

the cutting accessory may contact hidden

wiring or its own cord. If the cutting accessory

contacts a "live" wire, exposed metal parts of the

electrical tool may become "live" and give the oper-

ator an electric shock.

Pull the plug out of the plug so

cket before carrying

out any adjustments or servicing.

Avoid inadvertent starts by always unlocking the

switch wh

en the plug is removed from the mains

socket or in case of a power cut.

Ensure that the spot where y

ou wish to work is free

of power cables, gas lines or water pipes (e.g.

by using a metal detector).

Smaller workpieces must be secured to prevent

em from being carried along with the drill bit

during the drilling process (e.g. by clamping in a

vice or on a work bench with screw clamps).

Keep hands away from the rotating tool!

Remove

chips and similar material only when the machine is

at a standstill.

Metabo S-automatic safety clutch. When the safety

lutch responds, switch off the machine immedi-

ately! If the tool jams or catches, the power supply

to the motor is restricted. Due to the strong force

that can be generated, always hold the machine

with both hands using the handles provided, stand

in a steady position and concentrate on the work

being carried out.

The Metabo S-automatic safety clutch mus

t not be

used for torque control.

Caution when carrying out hard screwdriving

(

driving of screws with either a metric or an imperial

thread into steel)! The head of the screw may be

ripped off or high restoring torques may occur on

the handle.

Dust from material such as paint containing lead,

me wood species, minerals and metal may be

harmful. Contact with or inhalation of the dust may

cause allergic reactions and/or respiratory diseases

to the operator or bystanders. 

Certain kinds of dust are classified as carcinogenic,

suc

h as oak and beech dust, especially in

conjunction with additives for wood conditioning

(chromate, wood preservative). Material containing

asbestos must only be treated by specialists.

- Use a dust extraction device wh

ere possible.

- The work place must be well ventilated.

- The use of a dust mask of filter class P2 is recom-

mended.

Follow national requirements for

the materials you

want to work with.

5. Overview

See page 2.

1Geared chuck

2 Additional handle

3 Rotation selector switch

4Trigger

5 Lock button (continuous operation)

6. Initial Operation

Before plugging in the device, check that

the rated mains voltage and mains

frequency, as specified on the rating label,

match your power supply.

6.1 Assembly of the additional handle

For safety reasons, always use the addi-

tional handle supplied.

Open the clamping ring by turning the

additional

handle (2) anticlockwise. Push the additional

handle onto the collar of the machine. Advance the

additio

nal handle until it can be twisted. Then pull it

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Metabo BE 75-X3 QUICK in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2,25 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Metabo BE 75-X3 QUICK Manual

Product: