Manual Metabo BDE 1100 (page 8 of 56) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish)

595145

Zoom out

Zoom in

1/56

ENGLISHen

6 Rotation selector switch

7 Side handle

Metabo S-automatic safety clutch:

If the insertion tool jams or hooks, the power flow to

the engine will be restricted. Because of the high

power which then arises, always hold the machine

with both hands on the handles, stand safely, and

concentrate on your work.

Before plugging in check to see that the

rated mains voltage and mains frequency,

as stated on the rating label, match with your

power supply

Always install an RCD with a maximum trip

current of 30 mA upstream.

Australia: Always use a residual current

device (RCD) protected supply with a

rated residual current of 30 mA or less.

8.1 Depth Stop Setting

Loosen the side handle (7). Set depth stop (1) to the

desired drilling depth and retighten the side handle.

8.2 Switching On and Off

To start the machine, press the trigger (5).

The speed can be changed at the trigger.

Thanks to the electronic soft start the machine

accelerates continuously up to maximum speed.

For continuous operation the trigger can be locked

with the lock button (4). To stop the machine, press

the trigger again.

If switched on continuously, the machine

continues running if it is jerked out of your

hands. Therefore, always hold the machine

with both hands on the handles, stand safely,

and concentrate on your work.

8.3 Speed selection

Select the desired speed by turning the thumb-

wheel (3).

Change speed only when the machine is in the

process of running down (briefly switch it on

and off).

1st speed

(low speed, high torque) e.g. for

screwdriving, drilling

2nd speed

(high speed) e.g. for drilling

8.4 Selection of rotary direction

Do not actuate the rotation selector switch

(6) unless the motor has completely

stopped.

Selecting the direction of rotation:

clockwise

counter-clockwise

8.5 Tool change with a geared chuck (2)

Chucking the tool:

Insert the tool and use the chuck key to uniformly

clamp tight all 3 bores.

Removing the tool:

Open the geared chuck with the chuck key and

remove the tool.

8.6 Remove the handle.

To be able to remove the handle you must first of all

remove the chuck.

8.7 Removing the chuck

Geared chuck (2)

Undo the locking screw. Caution left-handed thread

Hold the drill spindle tight with a spanner. With a

light blow from a rubber hammer release the chuck

from the inserted chuck key and unscrew it.

6. Special Product Features

7. Initial Operation

8. Use

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Metabo BDE 1100 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,97 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Metabo BDE 1100 Manual

Product: