451399
9
Zoom out
Zoom in
Previous page
1/42
Next page
GB
Contens
1 Technical Data
2 Standard Accessories
3 User Responsibility
4 Safety Rules for Band Saws
5 Initiation
6 Operation
7 Additional Safety Rules
8 Spare Parts Lists
9 Optional Accessories
1 Technical Data
Max. height of cut 330 mm
Throat capacity 440 mm
Saw blade length 3380 mm
Saw blade width 6 - 25 mm
Saw table size 550 x 600 mm
Saw table tilt stepless from 90° to 45°
Blade speeds 50 Hz 68-176-375-967 m/min
60 Hz 82-211-450-1160 m/min
Height 1920 mm
Width 845 mm
Depth 745 mm
Table height from floor 926 mm
Weight 127 kg
Motors 1.1 kW/1.5 hp 115 V 50/60 Hz 1-phase
1.1 kW/1.5 hp 220/240 V 50/60 Hz 1-phase
1.5 kW/2.0 hp 220 V 50/60 Hz 3-phase
1.5 kW/2.0 hp 380/415 V 50/60 Hz 3-phase
Check motor label and mark motor model of your saw above.
2 Standard Accessories
2.1 General purpose blade 3380x15x0.5 mm, tooth spacing 6 mm
2.2 Rip fence
2.3 Adaptor 100 mm diameter for connection of dust extractor
2.4 Instruction manual
2.5 Allan key SW 3 mm
3 User Responsibility
This machine will perform in conformity with the description contained in the manual when installed, operated,
maintained and repaired in accordance with the instructions provided.
This machine must be checked periodically. Defective equipment (including service leads) should not be used.
Parts that are broken, missing, plainly worn, distorted or contaminated, should be replaced immediately. Should
such repair or replacement become necessary, it is recommended that such repairs are carried out by qualified
persons approved by the equipment manufacturer or its representative.
This machine or any of its parts should not be altered or changed from standard specifications. The user of this
machine shall have the sole responsibility for any malfunction which results from improper use or unauthorized
modification from standard specifications, faulty maintenance, damage or improper repair by anyone other than
qualified persons approved by the equipment manufacturer or its representatives.
Note
The information contained in this manual is intended to help the owner/operator of this band saw with the set-up
of the machine and setting of cutting speeds, fences and guards.
It is not a maintenance manual for servicing and repair nor does it teach the operator how to become an expert
woodworker.
2
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Metabo BAS 450 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Metabo BAS 450 in the language / languages: English, German, Dutch, French, Swedish, Spanish as an attachment in your email.

The manual is 0,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info