658520
19
Zoom out
Zoom in
Previous page
1/56
Next page
19
ENGLISH
Do not overload the machine – use it
only within the performance range it
was designed for (see "Technical
Specifications").
Use the correct power tool for your
application. The correct power tool
will do the job better and safer.
B
Danger! Risk of electric shock!
Do not expose the machine to rain.
Do not operate the machine in a
damp or wet environment.
Prevent body contact with earthed
objects such as radiators, pipes,
cooking stoves, refrigerators when
operating this machine.
Do not use the power cable for any
purpose it is not intended for.
Pull the plug out of the socket before
making any adjustments, converting
or servicing the tool or if you do not
use it.
A
Risk of injury by moving parts!
Do not operate the machine without
installed guards.
Always keep sufficient distance to
the band saw blade. Use suitable
feeding aids, if necessary. Keep suf-
ficient distance to driven compo-
nents when operating this machine.
Wait for the band saw blade to come
to a complete stop before removing
cutoffs, scrap, etc., from the work
area.
Cut only stock of dimensions that
can safely be held during cutting.
Do not attempt to stop the band saw
blade by pushing the work piece
against its side.
Ensure the machine is disconnected
from power supply before servicing.
Ensure that when switching on (e.g.
after servicing) no tools or loose
parts are left on or in the machine.
Unplug if the machine is not used.
Do not operate tool while under the
influence of drugs, alcohol or medi
-
cation. There is the risk of electrical
shock. Ask a qualified electrician
immediately to replace a damaged
mains cable.
Regularly check extension cables
and replace if damaged.
When working out of doors, only use
extension cables that are also
approved for outdoors.
A
Cutting hazard, even with the
cutting tool at standstill!
Wear gloves when changing cutting
tools.
Store band saw blades in such man-
ner that nobody can get hurt.
A
Risk of kickback (work piece is
caught by the band saw blade and
thrown against the operator)!
Do not jam work pieces.
Cut thin or thin-walled work pieces
only with fine-toothed band saw
blades. Always use sharp band saw
blades.
If in doubt, check work piece for
inclusion of foreign matter (e.g. nails
or screws).
Cut only stock of dimensions that
can be safely held during cutting.
Never cut several work pieces at the
same time – and also no bundles
containing several individual pieces.
Risk of personal injury if individual
pieces are caught by the band saw
blade uncontrolled.
When cutting round stock, use a
suitable jig to prevent the work piece
from turning.
c
Entangelement hazard!
Ensure that no parts of the body or
clothing can be caught and drawn in
by rotating components (no neck
-
ties, no gloves, no loose-fitting
clothes; contain long hair with hair
-
net).
Never saw work pieces containing
the following materials:
ropes
strings
cords
cables
wires.
A
Hazard generated by insuffi-
cient personal protection gear!
Wear hearing protection.
Wear safety glasses.
Wear dust mask.
Wear suitable work clothes.
When working outdoors wearing of
non-slip shoes is recommended.
A
Risk of injury by inhaled wood
dust!
Some types of wood dust (e.g.
beech, oak, ash) may cause cancer
when inhaled. Work only with a suit
-
able dust collector attached to the
saw. The dust collector must comply
with the data stated in the technical
specifications.
See to it that only as little as possible
wood dust will get into the environ
-
ment:
Remove wood dust deposit in
the work area (do not blow
away!);
fix any leakages on the dust
collector;
ensure good ventilation.
A
Hazard generated by modifica-
tion of the machine or use of parts
not tested and approved by the man-
ufacturer!
Assemble the machine in strict
accordance with these instructions.
Use only parts approved by the man-
ufacturer. This applies especially to:
band saw blades (see "Techni-
cal Specifications" for stock
nos.);
safety devices (see "Technical
Specifications" for stock nos.).
Do not change any parts.
A
Caution!
The use of other tools and acces-
sories can result in a risk of injury.
A
Hazard generated by machine
defects!
Keep the machine and accessories
in good repair. Observe the mainte-
nance instructions.
Before every use check tthe
machine for possible damage:
before operating the machine all
safety devices, protective guards or
slightly damaged parts need to be
checked for proper function as spec
-
ified. Check to see that all moving
parts work properly and do not jam.
All parts must be correctly installed
and meet all conditions necessary
for the proper operation of the
machine.
Damaged protection devices or
parts must be repaired or replaced
by a qualified specialist. Have dam
-
aged switches replaced by a service
centre. Do not operate the machine if
the switch can not be turned ON or
OFF.
Keep handles free of oil and grease.
Keep cutting tools clean and sharp-
ened in able to work better and safer.
A
Danger from blocking work-
pieces or workpiece parts!
If blockage occurs:
1. Switch machine OFF.
2. Unplug mains cable.
3. Wear gloves.
4. Clear the blockage using a suitable
tool.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Metabo BAS 317 Precision at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Metabo BAS 317 Precision in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 6,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Metabo BAS 317 Precision

Metabo BAS 317 Precision User Manual - Dutch, Portuguese, Spanish - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info