595121
14
Zoom out
Zoom in
Previous page
1/96
Next page
ENGLISHen
14
If the switch is (5) in the "0" position, you can use
the plug socket as an extension lead (e.g. for a light
fitting).
If the (6) switch is in the "A" position and the (5)
switch is in the "I" position, the vacuum cleaner can
be activated or deactivated by a power tool
connected to the power socket (7).
8.1 Dry Vacuuming
Vacuum using a dry filter, dry appliance and dry
accessories only. If the cartridge is damp, dust may
stick and form a crust.
Always use the paper filter bag (13) with the pleated
filter (11).
8.2 Wet vacuuming
Never operate the machine without inserting a
pleated filter (11). The machine may be
destroyed and water may also escape.
Vacuum without a paper filter (13) bag. The pleated
filter (11) is suitable for wet vacuuming.
Before carrying out any wet vacuuming, remove the
dry vacuumed material. This process will prevent
severe soiling and encrustation.
The float valve interrupts the suction process if the
container is full. Switch off the motor, empty
container and pleated filter (11), if required.
After switching off, some water may run back out of
the hose.
Before emptying, first of all take the suction hose out
of the liquid.
Use a dry pleated filter to carry out dry vacuuming
afterwards. If you are frequently switching between
dry and wet vacuuming, we recommend the use of
a second (replacement) pleated filter. Allow the
pleated filter, container and accessories to dry:
otherwise dust may adhere to damp components.
8.3 Transport
Leave the hose on the machine to prevent dust from
accidentally being released.
Wrap the suction hose about the vacuum cleaner.
Wind the mains connection lead (2) about the upper
part, as shown.
The upper part (1) must be securely sealed to the
container (4) - check that the snap locks (3) are
closed.
9.1 General Cleaning Instructions
Clean the container and accessories with water.
Wipe the upper part (1) with a damp cloth.
Caution! This appliance contains dust that is
harmful to health. Discharge and maintenance
operations (including disposal of the dust collection
containers) must only be carried out by qualified
specialists wearing appropriate protective clothing
and equipment.
Emptying the Container
Only permitted for dusts with
occupational exposure limits > 1mg/m
3
.
- unplug mains cable.
- Open the snap locks (3). Remove the upper part
(1) from the container (4).
- Tip out the container.
Remove the paper filter bag.
- unplug mains cable.
- Open the snap locks (3). Remove the upper part
(1) from the container (4).
- Carefully remove the paper filter bag (13). Seal the
flange of the filter bag by folding over the cover.
- Dispose of the vacuumed material in accordance
with legal regulations.
Clean the pleated filter
- Occasionally tap the pleated filter to remove (11)
any dust that has gathered on it. If the filter is very
dirty, you can clean it with water and a soft brush.
Allow to filter to dry properly afterwards.
10.1 General Instructions
Before performing any maintenance, always
switch off the machine and remove the mains
plug.
Clean the appliance (see section9.).
For maintenance by the user, the vacuum cleaner
must be taken apart, cleaned and maintained, to the
extent possible, without endangering maintenance
staff or other people.
Preventive Measures
Appropriate preventive measures include: cleaning
the appliance before disassembly; providing local
filtered forced ventilation where the vacuum cleaner
is disassembled; cleaning of the maintenance area
and providing suitable personal protective clothing
and equipment.
When carrying out maintenance or repairs, it is
essential to dispose of any contaminated objects
that cannot be adequately cleaned. These objects
must be disposed of using impermeable bags and
in accordance with the applicable regulations for
removing such waste.
10.2 Reduction in suction power
If the suction power decreases, carry out the
following steps:
1. Empty the container or replace the paper filter
bag (13).
2. Clean or replace the pleated filter (11).
10.3 Replacing the pleated filter (11)
(11)Seal the pleated filter immediately in a dust-
tight plastic bag and dispose of it in accordance with
regulations. Fit a new pleated filter, ensuring that it
is properly and securely positioned. See section
6.2.
8. Use
9. Cleaning
10. Maintenance
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Metabo ASA 32 L at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Metabo ASA 32 L in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 5,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info