783603
7
Zoom out
Zoom in
Previous page
1/22
Next page
First use
When the device is switched on for the first time, the device will emit a slight smell. Ensure that there is enough
ventilation.
Using your heater
1. Connect the mains cable to the wall socket and check whether the mains voltage corresponds to the voltage
printed on the rating label of the device.
2. Switch on the heater by turning the speed knob clockwise to the desired position.
3. The oscillation function can only be used with the highest heating level.
4. The device can become very hot on some parts, which can cause burns. You should take this into consideration,
especially when there are children and vulnerable people in the area.
Maintenance & cleaning
1. Before cleaning the device, allow it to cool down and unplug the power cord.
2. Do not immerse the device in water or clean it under running water.
3. Dust the grilles
4. With a damp sponge with water, only clean the housing of the device and then dry it with a dry cloth.
5. Do not use abrasives or sharp objects to clean the oven as this can scratch the oven body.
6. Before switching the heater on again and using it, allow all parts and the surface to dry thoroughly.
Disclaimer
Updates to hardware components are made regularly. Therefore some of the instruction, specifi cations and pictures
in this documentation may differ slightly from your particular situation. All items described in this guide for illustration
purposes only and may not apply to particular situation. No legal right or entitlements may be obtained from the
description made in this manual.
Recycling
This product bears the selective sorting symbol for waste electrical and electronic equipment This means
that this product must be handled pursuant to European Directive (2012/19/EU) in order to be recycled or
dismantled to minimize its impact on the environment. For further information, please contact your local
or regional authorities. Electronic products not included in the selective sorting process are potentially
dangerous for the environment and human heath due to the presence of hazardous substances.
Declaration of conformity
Hereby Gimeg Nederland B.V. declares that the device MKK-230, applies all basic requirements and other relevant
regulations listed in the European directive for electromagnetic compatibility (2014/30/EU) and low voltage directive
(2014/35/EU). If you require a full declaration of conformity, you can contact the adress listed on the backside of this
manual
ENGLISH
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mestic MKK-230 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mestic MKK-230 in the language / languages: English, German, Dutch, Danish, French, Italian, Spanish, Norwegian as an attachment in your email.

The manual is 1.38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info