784478
11
Zoom out
Zoom in
Previous page
1/40
Next page
ENGLISH
The meaning of the error code on the screen and how to deal with it:
E1 Battery voltage is low
E2 Fan failure
E3 Compressor start up problems
E4 Compressor's running speed fails to reach the requirements
E5 The model is overheating
E6 Module fault
E7 Thermal head fault (open circuit or short circuit)
Cleaning
Before cleaning, remove the products from the device and remove the plug from the power supply. Only clean
with a slightly damp cloth, if necessary a non-aggressive cleaning agent can be used. After cleaning, always dry all
wet surfaces with a dry cloth.
Never use sharp or abrasive products to clean the device.
Defrost the cool box: frost can settle on the evaporator or inside of the cool box due to humidity, this can reduce
the cooling capacity. The cool box must be defrosted in time. As follows
Take the products out of the cool box
Switch off the device
Open the lid
Sweep up the melt water or drain the melt water through the plug.
Recycling
This product bears the selective sorting symbol for waste electrical and electronic equipment This
means that this product must be handled pursuant to European Directive (2012/19/EU) in order to
be recycled or dismantled to minimize its impact on the environment. For further information, please
contact your local or regional authorities. Electronic products not included in the selective sorting
process are potentially dangerous for the environment and human heath due to the presence of
hazardous substances.
Declaration of conformity
Hereby Gimeg Nederland B.V. declares that the device MCCHD 33, MCCHD 45 & MCCHD 60 applies all basic
requirements and other relevant regulations listed in the European directive for electromagnetic compatibility
(2014/30/EU) and low voltage directive (2014/35/EU). If you require a full declaration of conformity, you can contact
the adress listed on the backside of this manual
Fan
Display contorl panel
Lighting panel
Spring switch
Module
Control panel
YCD33S1
YCD33S1.05-08
A
更改描述
电路图铭牌
*148
*90
技术要求:
1.标注*号处尺寸为重要检测尺寸,未注公差按GB/T 1804-m级;
2.字体要求清晰,间距均匀;
3.制件材质为哑银龙/25um,表面过膜,底色为哑光银色,LOGO颜色、字体及图形为黑色;
4.背面涂UL胶,胶层粘性按GB/T 2792 胶粘带与不锈钢180 度剥离方法测试,
剥离黏着力>10N/25mm。
5.高温、低温测试(贴于塑料件24H后再做测试);
60℃(6H)→-10℃(6H)→60℃(6H)→-10℃(6H),无起翘、无烧焦现象。
Made in China
C-Pentane
15.7 kg
12V/24V
Rated Current for DC
Total Input Power
Order number
Rated Voltage DC
60W
7.0A/3.5A
R134a (40g)
Iterm number MCCHD-33
Volume 31 L
Climate classification
Insulation class
Refrigerant
Foam Vesicant
Net weight
TSTSNN
Product name Coolerbox
黄玉莲 2020.12.23 杨得霖 2020.12.23
韩梦茹 2020.12.23
詹华安 2020.12.23
林良桥 2020.12.23
INK-024395
0.057t
CO equiv.
2
1.15.033-0204
Fan
Display contorl panel
Lighting panel
Spring switch
Module
Control panel
YCD33S1
YCD33S1.05-08
A
更改描述
电路图铭牌
*148
*90
技术要求:
1.标注*号处尺寸为重要检测尺寸,未注公差按GB/T 1804-m级;
2.字体要求清晰,间距均匀;
3.制件材质为哑银龙/25um,表面过膜,底色为哑光银色,LOGO颜色、字体及图形为黑色;
4.背面涂UL胶,胶层粘性按GB/T 2792 胶粘带与不锈钢180 度剥离方法测试,
剥离黏着力>10N/25mm。
5.高温、低温测试(贴于塑料件24H后再做测试);
60℃(6H)→-10℃(6H)→60℃(6H)→-10℃(6H),无起翘、无烧焦现象。
Made in China
C-Pentane
15.7 kg
12V/24V
Rated Current for DC
Total Input Power
Order number
Rated Voltage DC
60W
7.0A/3.5A
R134a (40g)
Iterm number MCCHD-33
Volume 31 L
Climate classification
Insulation class
Refrigerant
Foam Vesicant
Net weight
TSTSNN
Product name Coolerbox
黄玉莲 2020.12.23 杨得霖 2020.12.23
韩梦茹 2020.12.23
詹华安 2020.12.23
林良桥 2020.12.23
INK-024395
0.057t
CO equiv.
2
1.15.033-0204
Fan
Display contorl panel
Lighting panel
Spring switch
Module
Control panel
YCD45S1
YCD45S1.05-13
A
更改描述
电路图铭牌
*148
*90
技术要求:
1.标注*号处尺寸为重要检测尺寸,未注公差按GB/T 1804-m级;
2.字体要求清晰,间距均匀;
3.制件材质为哑银龙/25um,表面过膜,底色为哑光银色,LOGO颜色、字体及图形为黑色;
4.背面涂UL胶,胶层粘性按GB/T 2792 胶粘带与不锈钢180 度剥离方法测试,
剥离黏着力>10N/25mm。
5.高温、低温测试(贴于塑料件24H后再做测试);
60℃(6H)→-10℃(6H)→60℃(6H)→-10℃(6H),无起翘、无烧焦现象。
黄玉莲 2020.12.23 杨得霖 2020.12.23
韩梦茹 2020.12.23
詹华安 2020.12.23
林良桥 2020.12.23
Made in China
C-Pentane
17.2 kg
12V/24V
Rated Current for DC
Total Input Power
Order number
Rated Voltage DC
60W
7.0A/3.5A
R134a (50g)
Iterm number MCCHD-45
Volume 43 L
Climate classification
Insulation class
Refrigerant
Foam Vesicant
Net weight
TSTSNN
Product name Coolerbox
INK-024395
0.072t
CO equiv.
2
1.15.045-0376
Fan
Display contorl panel
Lighting panel
Spring switch
Module
Control panel
YCD60S1
YCD60S1.05-10
A
更改描述
电路图铭牌
*148
*90
技术要求:
1.标注*号处尺寸为重要检测尺寸,未注公差按GB/T 1804-m级;
2.字体要求清晰,间距均匀;
3.制件材质为哑银龙/25um,表面过膜,底色为哑光银色,LOGO颜色、字体及图形为黑色;
4.背面涂UL胶,胶层粘性按GB/T 2792 胶粘带与不锈钢180 度剥离方法测试,
剥离黏着力>10N/25mm。
5.高温、低温测试(贴于塑料件24H后再做测试);
60℃(6H)→-10℃(6H)→60℃(6H)→-10℃(6H),无起翘、无烧焦现象。
黄玉莲 2020.12.23 杨得霖 2020.12.23
韩梦茹 2020.12.23
詹华安 2020.12.23
林良桥 2020.12.23
Made in China
C-Pentane
19 kg
12V/24V
Rated Current for DC
Total Input Power
Order number
Rated Voltage DC
60W
7.0A/3.5A
R134a (60g)
Iterm number MCCHD-60
Volume 56 L
Climate classification
Insulation class
Refrigerant
Foam Vesicant
Net weight
TSTSNN
Product name Coolerbox
INK-024395
0.086t
CO equiv.
2
1.15.060-0273
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mestic MCCHD 60 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mestic MCCHD 60 in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Spanish, Norwegian as an attachment in your email.

The manual is 3.78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info