784475
10
Zoom out
Zoom in
Previous page
1/40
Next page
Battery power detection
The device features a multi-level battery guard that protects your vehicle battery from excessive discharge when the
device is connected to the built-in DC power supply. If the cooler is operated with the vehicle ignition off, the cooler
will shut off automatically when the power supply voltage drops below a set level. The cooler will turn back on once
the battery is charged to the restart voltage level. The compressor will restart automatically in a few minutes when
the voltage returns to normal values.
Note: these values are measured at the input of the control unit and / or at the DC connection.
1. Battery protection function for the cooler with three-class battery protection function, can automatically check
the battery voltage of the vehicle, before the electricity consumption will affect the normal functions of the car.
The cool box will stop automatically to ensure that the car’s battery does not run out.
(high “ ”) (middle “ ”) (low “ ”)
2. Method for adjusting the battery protection: read under the section “Control” how to adjust the battery
protection.
Tip: It is recommended to set the H-class when the cool box is connected to a vehicle, otherwise the car’s battery
may be too empty and affect the normal ignition of the car; When connecting the cool box to an external or backup
battery, it is recommended to set the M-mid range so that the cool box can work longer.
Error code list
Cleaning
1. Before cleaning, remove the products from the device and remove the plug from the power supply. Only clean
with a slightly damp cloth, if necessary a non-aggressive cleaning agent can be used. After cleaning, always
dry all wet surfaces with a dry cloth.
2. Never use sharp or abrasive products to clean the device.
3. Defrost the cool box: frost can settle on the evaporator or inside of the cool box due to humidity, this can
reduce the cooling capacity. The cool box must be defrosted in time:
1. Take the products out of the cool box
2. Switch off the device
3. Open the lid
4. Sweep up the melt water or drain the melt water through the plug
E1 Battery voltage is low
E2 Fan failure
E3 Compressor start up problems
E4 Compressor running speed fails to reach the requirements
E5 The model is overheating
E6 Compressor control module fault
E7 Thermal head fault (NTC open circuit or short circuit)
Voltage
Protection
Position
Display
12V 24V
CUT OFF (V) CUT IN (V) CUT OFF (V) CUT IN (V)
Low 1 bar 9.6V 10.9V 21.3V 22.7V
Middle 2 bars 10.4V 11.7V 22.8V 24.2V
High 3 bars 11.1V 12.4V 24.3V 25.7V
ENGLISH
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mestic MCC-40 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mestic MCC-40 in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Spanish, Norwegian as an attachment in your email.

The manual is 1.53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info