783608
7
Zoom out
Zoom in
Previous page
1/22
Next page
When the food is cooked, use the handle to lift the cover. Remove the food using a plastic spatula. Never use a metal clip or a knife,
as they may damage the non-stick coating of the baking trays.
Once you have nished cooking, disconnect the plug from the wall socket and let the appliance open for it to cool down.
5. MAINTENANCE AND CLEANING
In any event, unplug and let the appliance cool down before cleaning.
Reminder: do not immerse the appliance in water or any other liquid. Do not place the appliance in the dishwasher.
Do not use tools or abrasive solutions that would damage the coating of trays. You can use a wooden kitchen utensil or paper towel
to remove most of the dirt.
Clean the trays with a slightly damp sponge, or equivalent, and washing up liquid.
Wipe the outside of the appliance with a damp cloth only. Allow the device to dry after cleaning. Do not connect it if it is not dry.
6. WARRANTY AND LIMITATION OF LIABILITY
This product is guaranteed for a period of 24 months (dened by the local legislation) from the date of purchase, against any failure
resulting from a manufacturing or material defect.
This warranty does not cover damage resulting from improper installation, improper use, or normal wear of the product.
More precisely, the warranty does not cover:
Damage or problems caused by improper use, accident, alteration or an electrical connection of intensity or wrong voltage.
The changed products, whose warranty seal or the serial number have been damaged, altered, deleted or oxidized.
Replaceable batteries and accessories are guaranteed for a period of 6 months.
Battery failure, which occurred by a too long loading or by the non-compliance of the safety instructions explained in the leaet
Aesthetic damage, including scratches, dents or any other element.
Damage caused by any operation carried out by an unauthorized person.
Defects caused by normal wear or due to the normal aging of the product
Software updates, due to a change in network settings
Product failure due to the use of third party software to modify, change, adapt or modify the existing one
Product failure due to the use without the accessories approved by the manufacturer
Rusted products
In no case, shall the manufacturer be responsible for the loss of data stored on the disk. Similarly, the manufacturer is not required to
check that the SIM/SD cards are well removed from the returned products.
The repaired or replaced products may include new and/or reconditioned components and equipment.
Implementation measures
To obtain a warranty service, you are kindly requested to bring your product back at your point of sale tted with your proof of
purchase (receipt, invoice, etc.), of the product and its supplied accessories, with its original packaging. It is important to have
information regarding the date of purchase, model and serial number or IMEI (these information usually appear on the product, the
packaging or your proof of purchase).
Otherwise, you must return the product with the necessary accessories for proper operation (power supply, adapter, etc.)
In the event your claim is covered by the warranty, the after-sales service may, within the limits of the local legislation, either:
Repair or replace the defective parts
Exchange the returned product with a product having at least the same features and which is equivalent in terms of performance.
Reimburse the product at the purchase price of the product mentioned on the proof of purchase.
If one of these 3 solutions is used, this does not give right to the extension or renewal of the warranty period.
ENGLISH
Declaration of conformity
Hereby Gimeg Nederland B.V. declares that the device MC-100, applies all basic requirements and other relevant regulations listed
in the European directive for electromagnetic compatibility (2014/30/EU) and low voltage directive (2014/35/EU). If you require a full
declaration of conformity, you can contact the adress listed on the backside of this manual
Recycling
This product bears the selective sorting symbol for waste electrical and electronic equipment This means that
this product must be handled pursuant to European Directive 2012/19/EU in order to be recycled or dismantled to
minimize its impact on the environment. For further information, please contact your local or regional authorities.
Electronic products not included in the selective sorting process are potentially dangerous for the environment and
human heath due to the presence of hazardous substances.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mestic MC-100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mestic MC-100 in the language / languages: English, German, Dutch, Danish, French, Italian, Spanish, Norwegian as an attachment in your email.

The manual is 1.13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info