609981

Messner system-Tec 4000 Manual

7
Zoom out
Zoom in
Previous page
1/27
Next page
10 11
Bestelling van vervangende onderdelen
Geef bij uw bestelling alstublieft de naam van het onderdeel, het type pomp en het art.nr. uit de volgende
tabel aan (zie ook afb. 4 - 6).
Pos. Naam Type pomp Art-nr.
1 Filterkap system-Tec 1000, system-Tec 2000 104 / 004473
system-Tec 3000, system-Tec 4000 104 / 004476
2 Afdekplaat system-Tec 1000, system-Tec 2000 104 / 004475
system-Tec 3000, system-Tec 4000 104 / 004478
3 Voet system-Tec 1000, system-Tec 2000 104 / 004477
system-Tec 3000, system-Tec 4000 104 / 004474
4 Rotor system-Tec 1000 ME 9145
system-Tec 2000 ME 9117
system-Tec 3000, system-Tec 4000 ME 9172
6 Pomphuisdeksel system-Tec 1000, system-Tec 2000 ME 9146
system-Tec 3000 ME 9110
system-Tec 4000 168 / 009174
7 Drievoudige verdeler system-Tec 1000, system-Tec 2000 164 / 004485
system-Tec 3000, system-Tec 4000
Sok G ½˝ system-Tec 1000, system-Tec 2000 901040
Sok G ¾˝ system-Tec 3000, system-Tec 4000 901041
Garantievoorwaarden
Op de pomp wordt 24 maanden garantie verleend welke ingaat op het moment van aankoop. U dient
hiervoor de aankoopbon als bewijs te bewaren. Schade aan de pomp binnen de garantietermijn, ontstaan
door een produktie en/of materiaalfout, wordt kosteloos hersteld. Schade die is ontstaan door; inbouwen
bedieningsfouten. Kalkaanslag, te weinig onderhoud, bevriezing, normale slijtage of ondeskundige
reparaties, vallen niet onder deze garantieaanspraak.
Bij veranderingen aan de pomp, zoals het inkorten van de stroomkabel of het afknippen van de stekker,
vervalt de aanspraak op garantie.
Meßner is niet aansprakelijk voor de gevolgschade die is ontstaan door het uitvallen of het verkeerd
gebruiken van de pomp. Stuur bij reparatie altijd uw garantieformulier en aankoopbon mee.
Het verwijderen en de afvalopslag van
Elektrische apparaten die in het huishouden zijn gebruikt, dienen volgens EU-richtlijnen verwijderd
te worden.
Het produkt mag niet samen met het andere normale afval verwijderd worden, maar dient apart verzameld
te worden. Het is gescheiden afval.Het is uw eigen verantwoordelijkheid dat het apparaat naar een speciaal
daarvoor bestemde afvalplaats wordt gebracht om op een milieuvriendelijkere manier te worden verwijderd
of te worden hergebruikt.
Meer informatie over lokale afvalverzamelpunten vindt u bij de gemeente in uw gebied.
Please read these instructions thoroughly, before using the pump!
This appliance is not suitable for use by persons (including children) with limited physical, sensory or mental
capabilities or lacking experience and/or knowledge, except if they are supervised by a person responsible
for their safety or have been instructed in the use of the appliance.
Children should be supervised in order to make sure that they do not play with the appliance.
Use
Centrifugal pump for submersible usage with resin encapsulated motor.
The pumps are designed for use in water, for instance: Garden pond, fish pond, fountain, terrace fountain,
indoor fountain, for operating filter systems, watercourses, as well as for aerating and recirculating water.
The pump may not be used in or on the side of swimming pools!
Please refer to the type plate for technical specifications or the table on page 1.
Safety measures
- Caution! It may only be used in garden ponds and in their protection area if the electrical installations
have been set up to comply with the code‘s requirements. Please contact an electrician.
- Before use: Check whether mains connection and plug are intact.
- Mains voltage and type of current have to correspond to the data on the type plate.
- The pump has to be connected to a regular safety plug socket through a residual current device
(RCD, 30 mA).
- The connection box should be located in a water-protected area. It should be at least 2 m away from the
edge of the pond (see fig.1).
- Keep the plug dry!
- Pull out mains plug before starting to work on the pump, fountain or pond. It is not allowed to run
the pump when people are inside the water (disconnect the pump)!
- Important! If the mains connection or the motor housing is damaged, the pump cannot be used anymore.
It cannot be repaired since the connection is cast into the motor housing.
- Never hang up or transport the pump by the cable!
- Operate the pump only when it is immersed in water!
Start-up (see fig.1)
Important! Do not let the pump run dry. This could cause damage to the appliance.
- Immerse the pump completely in your pond. This causes the pump body to be filled with water.
- A minimum water depth of 20 cm is required for underwater operation to avoid the pump taking in air.
- The maximum depth for submerged operation of the
2 m
pump is 2 m!
- The water temperature should not exceed 35°C.
- Do not let the pump freeze in the wintertime.
- The pump is switched on by putting the plug in the socket.
- To prevent the pump becoming unnecessarily dirty, place it above the mud in your pond, in a firm and
horizontal position (on a brick)!
- A range of accessories may be fitted onto the threaded connection of the pump.
- Running in conjunction with fountain jets, the pump should be positioned firmly and horizontally (on a
brick).
Function - adjustable triple distributor (see Fig. 6 - 7)
The adjustable triple distributor included in the scope of delivery makes it possible to split the delivery
quantity into three directions. Each individual connection can be adjusted from 0 - 100%!
- If you do not need a connection, unscrew the nut (7.3) and turn the hose adapter (7.2) clockwise to the
stop!
- Slide the hoses (S) onto the hose adapters (7.2) and secure them, if necessary.
- Place the pump, plug in the socket outlet, and check the flow rates on the individual hoses (S).
- If necessary, adjust the flow rates, as needed:
- Unscrew nut (7.3).
- Turning the hose adapter (7.2) clockwise reduces the flow rate.
- Turning the hose adapter (7.2) counterclockwise increases the flow rate.
- Then fix the adjustment in place by tightening the nut (7.3)!
GB
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Messner system-Tec 4000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Messner system-Tec 4000 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info