609945
63
Zoom out
Zoom in
Previous page
1/68
Next page
61
- 一系列的附件可以安装在设备的连接管道上。
- 提供的过滤网格用来过滤干净的水是足够的。
- 出水口管道既可以安装在朝上,也可以安装在朝侧面的位置,这将取决于具体的要求。
- 合适的喷头可参见我们的附件(目录册)。
陆地安装(见图2+3)
设备也可用于在陆地安装应用。
- 将设备放置在低于液面,且在池塘的旁边的位置以至于水可以流入水泵(不是自吸)。
- 移去前端网格(8)(见图5)。
- 连接入水口软管(S)和出水口软管(D)到设备上,连接的管道必须是防水的。
- 在启动设备前,让设备里面和入水口软管已经灌满水。
- 提示:为了防止设备堵塞,在装入水口软管时,可以提供预过滤装置168 / 009051,
(也在附件销售范围内)。
过载保护
内置的过热过载保护装置可以阻止设备过热,这样设备就必须冷却下来。
当冷却以后,设备需要重新启动。
检查一下如下几种的设备的工作情况:
- 是否有一个充足的水源供给?
- 过滤外壳是否堵塞?
- 是否有脏东西进入了中座(遵循清洗说明书的步骤)?
- 软管或者喷头是否堵塞?
- 水泵是否已经冷却?
一旦你已经解决了问题,你可以通过抽出插头1分钟后重新插入插座来再次启动设备。
拆卸步骤(见图4-9)
1. 遵循安全说明,断开设备的电源!
2. 抓住设备前端的白色夹子(20+21),向前上方旋转。
3. 将设备前段的卡口向里面摁。然后取下上壳(1)。那么网状的过滤前盖(8),右边盖(7),
左边盖(5)就松了。
4. 将带有固定环(12)的机体(10)从底壳(2)上取下来。
5. 松开4颗螺钉(18)。
6. 将固定环(12)和中座(10)分离。
7. 从中座(10)里面取出转子组件(15)。注意中座里面的O型圈(10)。
8. 用清水和软棉球清洗所有的部件。注意!一旦有大面积的残垢,请使用MESSNER的专用清洗剂,订货
号 为168 / 009115。
装配(见图4-9)
1. 将O型圈(16)压在中座(10)的槽里。
2. 将转子组件(15)小心的放进中座(10)中,同时注意将轴承定位环上的两个孔对准中座上的两个小凸
台 。
3. 确定转子组件是完全自由且可旋转的 。
4. 检查一下O型圈(16)在中座(10)上的位置 。
5. 装上固定环(12)并将4颗螺钉(18)拧在中座(10)上 。
6. 将机体(10)安装到底壳(2)上。
7. 将上壳(1)安装到底壳(2)上,并扣上后端的扣和前段的卡口。
8. 抓住两个夹子(20+21),向后下方旋转扣上,这个可以锁住上壳(1)与下壳(2)。
9. 将网状的过滤盖插入到它合适的位置。比如上方(3),右边(7)和左边(5)。
维护
为了延长设备的使用寿命并让它在一个好的状态下运行,建议按照如下的清洗和维护方法。
每个人都可以方便快捷的做这些简单的操作。请见“拆装步骤”。
维护方法
- 开始阶段每天检查一下水泵的运行状况,如果必要清洗过滤外壳。
- 维护的周期(完全清洗)将取决于池塘的污染程度,重复周期性的维护将依照要求来执行。
如果您确定有零部件损坏或者磨损,建议跟换它。详见“备件”。
重要:如果池水为含钙的水质,转子组件(15)和中座(10)中的不锈钢金属套筒
必须周期性的清洗。
63


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Messner eco-X2 7500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Messner eco-X2 7500 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info