797765
6
Zoom out
Zoom in
Previous page
1/132
Next page
6
- Press button “F” to select fan mode, the LCD screen will show “FA”, next press the button “L” to get slow fan speed button or press the
button “M” to get fast fan speed button. During fan mode operation the temperature and sleeping functions cannot be setup.
Press button “A” to turn on and turn off the device, the buzzer will play signal once.
B. Mode selection button
C. Temperature / timer down button
MODE SELECTION on manual operation of control panel –
When the device is power on, choose mode you need between cooling mode or fan mode or dehumidifying mode as below:
Press the up and down buttons at the same time when you need shift to .˚F
A. Power button
When the is powered on for the first time, the buzzer will shout, and then the device will get into standby status.
- Press button “J” to select cooling mode, next press the button “L” to get slow fan speed button or press the button “M” to get fast fan
speed button. Next press button “ C” or “ D” to adjust required temperature from 16 to 31, buttons are not available in fan or
dehumidifying mode.
Fan mode -
G. Timer button
Remote controller – Picture E
D. Temperature / timer up button
E. Sleep mode button
CONTROL PANEL manual operation – picture D
Cooling mode -
F. Fan speed selection button
- When the device is working, press button “G”, the LCD screen flashes, press the button “C” or “D” to set up the quantity of hours need to
pass before the device will shut off automatically. The LCD screen stops flashing, the timer icon will be illuminated, LCD screen shows
required to achieve temperature. This is a delayed start function.
Water full -
Button "G" - press it to set up or cancel timer.
Button "F" - press it to select fan speed in sequence: slow / fast wind speed.
Button "E" - press it to set up or cancel sleep mode.
Button "B" - press it to select operation mode: cool mode → dry mode → fan mode.
Sleep mode –
- Press button “K” to select dehumidifying mode, the LCD screen will show “dh”. Under dehumidifying mode, sleep mode cannot be setup,
and fan speed is fixed on slow fan speed automatically and cannot be changed. In order to switch off the dehumidifying mode select other
operation mode: cooling or fan mode.
Timer set up -
NOTE: Sleep mode is not available in dehumidify and fan modes.
The water full indicator lamp “N” will be illuminated and the buzzer will alarm for several second, then the compressor will stop to work when
the inner device water tank will be full.
Button "A" - the device will be started when it is energized or will be stopped, if you press this button again.
Timer operation range can be fixed by each one hour from 1 to 24 hours.
- When the device is not working, press button “G”, the LCD screen flashes, press the button “C” or “D” to set up the quantity of hours after
the device will start to operate. The LCD screen stops flashing and timer icon will be illuminated.
- The sleep mode is automatically programmed. After the first hour of operation, the temperature will increase by 1 , after the second
hour of operation, the temperature will increase by another 1 , and then remain at the same level.
- Press button “E” again to cancel sleep mode.
- Next press button “ C” or “ D” to adjust required temperature from 16 to 31.
REMOTE CONTROLLER operation – picture E
Dehumidifying mode –
The remote controller transmits signals to the system.
Button "C" / "D" - press to set up the operation time from 1 to 24 hours or required room temperature from 15 to 31°C when cooling mode is
switched on.
- At first Press button “J” to cooling mode, next press button “E” to turn on the sleep mode, then the device will work on Energy-Saving and
quiet type.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mesko MS 7928 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mesko MS 7928 in the language / languages: All languages as an attachment in your email.

The manual is 5.58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info