797745
5
Zoom out
Zoom in
Previous page
1/72
Next page
1. Put the items in the bag. Open the cover, place the other side (not welded) on the suction surface (6). Close the cover by pressing
(Fig. B) to hear the "click" sound.
3. Press the button (3) to start air suction and welding. The device will automatically turn off when welding is finished.
1. Connect the container (not included) with the suction nozzle (10) using the tube (12) (Fig. C).
Tips for ready-made bags or rolls (foil sleeve):
1. Maximum width: 30 cm
2. Use only ready-made bags (open on one side) or foil rolls in the form of a sleeve (open on both sides) intended to vacuum sealing
(CR 4470.1)
In order to obtain proper welding, the foil should be clean, dry and free of creases in the welding strip (7).
2 Put the power cord (13) to socket (14) and connect to the power socket. The lamp (1A) will turn on (default setting).
b). Close the cover by pressing down on the sides (Fig. B) to hear the "click" sound and press the button (2). The device will
automatically turn off after welding is completed.
c). Press both of the release buttons (4) to open the device.
4. Disconnect the left and then the right cover opening buttons (4) first and lift the cover.
The set includes a tube (12) for sucking air from vacuum containers
a). Open the cover, place one side of the cut foil sleeve in the suction surface (6) so that it does not protrude behind the nozzles (10) as
shown in the figure A.
2. By pressing the button (1) select the type of product inside of the bag.
* “Moist” – moist (1B)
USE OF THE DEVICE
3. After air extraction, disconnect the device and the external vacuum container.
NOTE: when extracting air from external vacuum containers, do not close the cover to avoid deformation of the gasket (9).
1.Depending on the size of the products, cut the required length of the bag.
I. Air extraction and welding
* “Dry” – dry (1A)
II. Extraction of air from external vacuum containers / bags
Preparation of a bag from a roll of foil sleeve (open on both sides).
2. Press the button (11). The button will automatically turn off when air extraction is finished.
2. Seal one side of the cut sleeve forming the bag:
1. Product type setting / dry (1A) or moist (1B) 2. Seal button
5. Cover lock 6. Suction surface
15. Never touch the appliance with wet hands.
7. Welding strip 8. Sealing sponge
9. Sealing bar 10. Suction nozzle
11. Button for air extraction from the vacuum tank 12. Tube for evacuation of air from vacuum tank
16. Use only the original accessories or recommended by the manufacturer.
18. When using the device, and especially when closing it, pay special attention to your
hands - do not put your hands into the sealing elements.
3. Air extraction & sealing button / cancel button 4. Buttons for opening the cover
13. Power cord 14. Power socket
DESCRIPTION OF THE DEVICE
14.In order to provide additional protection, it is recommended to install residue current
device (RCD) in the power circuit, with residual current rating not more than 30 mA.
Contact professional electrician in this matter.
20. The vacuum sealer is not suitable for packing liquids.
19. Do not use flammable objects.
21. The vacuum sealer is intended for home use only.
22. Protect from moisture.
17. Use the device only for its intended purpose. Do not use outside. Protect against
moisture.
5
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mesko MS 4492 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mesko MS 4492 in the language / languages: All languages as an attachment in your email.

The manual is 4.18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info