797738

Mesko MS 4217 Manual

4
Zoom out
Zoom in
Previous page
1/68
Next page
4
20. Do not use different type of accessories (e.g. for mixing and whipping) at the same time.
21. Maximum time of continuous operation is 7 minutes. After you operate device for 7
minutes switch it off and allow to cool.
3. Bowl 3,5 liters 4. Base
1. Top of food processor 2. Tilt button
19. The device has been designed to prepare small amounts of food products. The device is
not intended for industrial food processing.
DESCRIPTION OF THE DEVICE (figures 1 and 2 and 3)
Max operation time in one cycle: 7 minutes.
Power supply: 220-240V ~50/60Hz
Power: 700W Max Power: 1200W
5.Don't immerse the base in water or other liquids.
TECHNICAL DATA
Minimum rest time between cycles: 30 minutes.
5.Hold down the tilt button (2), the top of the mixer (1) will automatically lift and lock into the tilt position.
Warning: Do not put knife, metal spoons, fork, spatula and so on into the bowl when it is operating.
4.When mixing is completed, turn the speed selector to “0” position, unplug the cord from power outlet.
6.If necessary, you can scrape the excess food from an attachment by plastic spatula.
7.Pull out the mixing attachment with a little force by turning to the left side and then down. The speed selector
must be at “0” position and the power outlet must be unplugged before pulling out the mixing attachment.
The food processor will automatically switch off after the locked-rotor motor stop working for 15 seconds. The
device can’t continually work for a long time, if work more than 7 minutes, please wait for 40 minutes before the
next mixing.
2.Remove the accessories before cleaning them in water with washing-up liquid. Do not wash in dishwashers.
CLEANING AND MAINTENANCE
4.Do not use abrasive materials to clean the device.
1.Unplug the device from the power and let it cools down before cleaning.
3.The max operation time in one cycle shall not exceed 7 minutes and 40 minutes minimum rest time must be
maintained between 2 consecutive cycles.
3.Wipe the external parts with kitchen towel or soft cloth.
1. Ensure that the speed selector is at the OFF position, then insert the plug in the power source.
FOOD PROCESSOR USING
Attachment B: suitable for speeds 3-4. Time of operation: 5-7 minutes.
2. Turn the speed selector (6) to your desired speed setting from “0” that means OFF position till “6” means the
fastest speed.
Attachment A: suitable for speeds 1-3. Time of operation: at speed 1 and 2 is 30 second, at speed 3 is 3-5
minutes.
Attachment C: suitable for speed 5-6. Tune of operation: 5-7 minutes. To whip the egg whites, use a minimum of 3
eggs, a maximum of 12 eggs.
A – Dough hook B – Mixing beater C – Egg whisk
1.Press the tilt button (2), the top of the mixer (1) will automatically release and lock into the tilt position.
2.Select the desired attachment, which is depending on the mixture to be performed:
Before assembling the food processor, be sure the power cord unplugged from the power outlet and the speed
selector is on the "0" position.
A - dough hook for kneading the paste,
B - mixing beater for mixing and beating eggs and butter,
BEFORE USING MULTIFUNCTION FOOD PROCESSOR
C - egg whisk for beating and frothing the egg white / cream / liquid food.
4.Place the bowl (3) on the base (4), then turn the bowl (3) in clockwise until it locks.
5.To lower the top of food processor (1), press the tilt button (2) and push by one hand the top of food processor
(1) down. A click sound will be heard when the head has reached the correct position. Make sure the bow cover
(5) is fixed in place (see figure 1).
3.Insert the desired attachment directly, until it lock into correct position – see figures 4 and 5.
Note: Ensure the attachment is fully inserted into the socket, otherwise your mixing result may be affected.
5. Bowl cover 6. Speed selector
Device marked CE mark on rating label
Device is made in class II of insulation. Device is compliant with EU
directives:
- Low voltage directive (LVD)
- Electromagnetic compatibility (EMC)
To protect your environment: please separate carton boxes and plastic bags and dispose them in corresponding waste
bins. Used appliance should be delivered to the dedicated collecting points due to hazarsous components, which may
effect the environment. Do not dispose this appliance in the common waste bin.
… 4 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mesko MS 4217 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mesko MS 4217 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 5.34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info