797714

Mesko MS 3032 Manual

4
Zoom out
Zoom in
Previous page
1/72
Next page
4
1. Remove all cartons and labels from housing and from inside (between hotplates).
1. lid 2. power indicator
3. ready indicator 4. buckle
2. Wipe hotplates first with wet and next with dry damp cloth.
BEFORE FIRST USE
29. The device can not be used with external time switches or other separate remote
control systems
DESCRIPTION OF DEVICE
18. The device must cool down before you store it.
14.In order to provide additional protection, it is recommended to install residue current
device (RCD) in the power circuit, with residual current rating not more than 30 mA.
Contact professional electrician in this matter.
20. The device is not designed to work with external schedulers or separate remote control
system.
Never touch the hot surfaces of the appliance.
28. SAVE CAREFULLY if you use the device on surfaces sensitive to high temperatures. It
is recommended then to use insulating washers
21.Do not insert food portions that use whole oven volume, as it may cause fire and
destruction of the device.
23. Do not move or carry the device during operation. After the operation it can be moved
only if it had enough time for cooling down.
24.Open device by holding the handle. Before that, release the buckle (4).
15. Accessible surface temperatures can be high when the appliance is operating.
During or after use, please do not touch the baking tray or the hot area on the shell before
the temperature goes down.
19. Do not place products made of cardboard, paper, plastic materials or other flammable
or meltable objects in the device.
16. Due to the high temperature you should be careful when removing the
prepared dishes, removing hot grease or other hot liquids. Be careful, there can be hot
steam presence during use of the appliance.
22.The power cord may not be placed above the device and it may not touch or be located
near hot surfaces. Do not place the device under a mains socket.
26. Before first use, remove all packaging components. Attention! In the case of a casing
with metal parts, on these elements a slightly visible protective foil can be stretched, which
should also be removed.
17. This electrical appliance contains a heating function. Surfaces, also different than the
functional surfaces, can develop high temperatures. The equipment shall be touch only at
intended handles and gripping surfaces, and use heat protection like gloves or similar.
27. NEVER cover the device during operation or when it does not cool down completely,
remember that the heating elements of the device take time to cool down completely.
25. Before and during use, make sure that the power cord is not stretched over an open
flame or other heat source or sharp edges that may damage the insulation of the cable.
… 4 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mesko MS 3032 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mesko MS 3032 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 3.5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info