494961
9
Zoom out
Zoom in
Previous page
1/34
Next page
I n s t a l l i n g t h e
d i g i t a l v i d e o
p r o c e s s o r
5
The processor monitors the DVI input and output status and provides the following
information on the front panel display:
Display Explanation
DVI Input signal is supported
NO INPUT No signal is detected.
DVI PASS-THROUGH A VESA rate has been detected and sent to the output
unprocessed.
RATE NOT SUPPORTED A VESA or non-video rate has been detected but the selected
output is analogue RGB or YPrPb.
The input type is auto-detected. Supported video rates for processing are 480i/480p,
576i/576p, and 720p/1080i at 50Hz or 60Hz. VESA rates, including 1080p signals, are sent
to PASS-THROUGH only.
To select the DVI input
Press DVI on the remote control.
To display the signal without processing
Press Bypass on the remote control.
A DVI cable must be connected from the processor to the display and the digital output
must be activated in the processor
SETUP menu.
With HDCP encrypted sources, it may take up to 15 seconds for the HDCP authorisation
between source and display to be acquired. The display device must be HDCP compatible
to view an image. If a switcher is used, it must also be HDCP compliant. HDCP acquisition
problems may be displayed as snow or a flashing image on the screen.
The DVI input levels and sync type must be matched to the DVI source in the
SETUP menu.
See
Configuring the digital video processor
, page 17, for details.
Some DVD players may offer a better image using the analogue YPrPb connections with the
player set to 480i/576i output. This allows the DVP1080HD to do all the deinterlacing and
digital conversion.
To connect two or more HDMI or DVI sources
DVP1080HD Digital Video processor
HDMAX 421
HDMI OUT
4 3 2 1
Satellite receiver
HDMI OUT
HDMI OUT
G91A DVD Player
HDMI to
DVI cable
The Meridian HDMAX 421 allows you to connect up to four HDMI or DVI video sources
to a single HDMI or DVI input. In addition, when a Meridian DVD Player is used as the
controller, the HDMAX 421 automatically selects the appropriate video input corresponding
to the currently selected source.
Connect the output of the HDMAX 421 to the DVI input of the DVP1080HD using an
HDMI to DVI cable.
Connect the HDMI out from the G Series DVD Player to HDMI input 4 on the HDMAX
421.
Connect up to three other HDMI or DVI video sources to HDMI inputs 1 to 3 on the
HDMAX 421.
In the G Series DVD Player
HDMI Options screen set the HDMI Switch option to On.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Meridian DVP 1080 HD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Meridian DVP 1080 HD in the language / languages: English as an attachment in your email.

The manual is 0,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info