494851
8
Zoom out
Zoom in
Previous page
1/12
Next page
8
The C52 contains two identical subwoofer
controllers, Channel 1 and Channel 2. Unless
otherwise stated, this section refers to one
section only.
Output Connections
Connect the cables from the rear-panel output
terminals to the loudspeakers. Be sure to
observe correct polarity, and note that these
terminals can develop significant voltages/
current-passing capability when the C52 is
powered up and being fed with an active
signal. Ensure that connections are made
with the power disconnected from the
unit.
Digital connections
Identify the S/PDIF digital connections on the
rear panel as shown on the diagram above.
The Digital Input should be connected to
a digital source, such as a digital sound
processor, or digital preamplifier.
The Digital Output may be connected to a
second (slave) DSP loudspeaker, using an S5
lead.
The S/PDIF cable connected to the digital
input carries two channels. Set the DIGITAL
CHANNEL SELECTOR switches on the front
panel switch to indicate which channel(s) are
directed to each subwoofer.
• Ifyouareconnectingthesubwoofertothe
Centre/Sub or Side/Sub output of a Meridian
digital surround processor, set the switch to
position 2.
• Ifyoursystemincludesastereopairof
subwoofers, set the left subwoofer to position 1
and the right subwoofer to position 2.
• Ifyouareconnectingasinglesubwoofertoa
stereo digital system with no centre channel
output, such as a Meridian CD player, set the
switchtoposition1+2,tomixthesignalsfrom
both channels.
• Thedigitalconnectionsshouldbemadewith
high-quality 75 screened cable. Suitable cables
are available from Meridian.
• Wedonotrecommendusinganalogueaudio
cables, which do not have adequate shielding
or the correct impedance, or cables intended
for UHF applications, as these do not provide
adequateshieldinginthe1–30MHzregion.
• Whenadigitalsignalisappliedtoachannel,
the front panel “Digital Signal Lock” indicator
will illuminate to show that the digital signal is
being correctly received.
Communications connections
Connect the Meridian Communications
sockets to the COMMS connection on a
Meridian control unit or preamplifier, using a
COMMS lead.
C52 Rear Panel (above) and front panel with acrylic cover removed (below)
CONNECTING THE C52
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Meridian C52 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Meridian C52 in the language / languages: English as an attachment in your email.

The manual is 1,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info