494844
58
Zoom out
Zoom in
Previous page
1/75
Next page
51
CONFIGURING THE
DIGITAL SURROUND
CONTROLLER
Calibration tests
Levels
These tests allow you to adjust the output level to each speaker
individually, and it follows the general guidelines from Dolby Laboratories
and Lucasfi lm Ltd. A Sound Pressure Level (SPL) meter can be useful at this
stage; see Using a Sound Pressure Level meter, page 49.
In each test the display shows the speaker being tested, and the current
relative level.
For example:
Left Level +0.0dB
If you have an on-screen display it shows:
• Press > or < to move between each of the speakers in the layout in the
sequence: Left, Centre, Right, Side R, Rear R, Rear L, Side L, and
subwoofers.
• Press A or V to adjust the level of the speaker. Ignore any tonal
difference.
For correct THX reproduction you should adjust each speaker to 75dB SPL
using an SPL meter. Even if your speakers are not THX approved this setting
is recommended.
Note: You cannot directly set the level of a subwoofer
by ear, because low-frequency noises sound quieter. To
set the subwoofer correctly either use an SPL meter, or
set it by ear and then reduce the subwoofer gain by 15dB to
correct for human hearing.
When you have completed the Levels section press > or Store to
proceed to the next test.
If you have Meridian DSP
loudspeakers they cannot be set
above +0dB.
58


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Meridian 861 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Meridian 861 in the language / languages: English as an attachment in your email.

The manual is 3,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info