494960
32
Zoom out
Zoom in
Previous page
1/70
Next page
24
Installing the 810
Scaler
Control connections
Use this connection To connect to this
RS232 Projector The RS232-C input on the 810 D-ILA Projector.
RS232 Control A controller, such as a Crestron, for remote control of the 810 video system. For more
information see the
810 RS232 Interface Guide
, available separately.
RS232 Maintenance (front panel) For firmware updates.
Meridian Comms Meridian G Series or 800 Series equipment, or Meridian DSP loudspeakers.
IR IN A G12 IR Receiver, or approved alternative infra-red repeater.
Trigger 1, Trigger 2, Trigger 3 Other equipment, via mono 3.5mm jack plug outputs (tip hot) providing 12VDC. They
are always low in standby. By default they are high for all sources, so can be used to
bring another product out of standby. Alternatively you can program them to be high
for specific sources; eg to control a projection screen. In systems with an anamorphic
lens sled, Trigger 1 and Trigger 2 are dedicated to Sled Power and Sled Actuate
respectively.
Ethernet For future expansion.
USB Host (back and front panel) For future expansion.
The RS232 connections should be made using RS232
Male-Male Null Modem serial cables.
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Meridian 810 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Meridian 810 in the language / languages: English as an attachment in your email.

The manual is 1,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info