494960
12
Zoom out
Zoom in
Previous page
1/70
Next page
4
Introduction
Specifications Projector
General
Power supply: AC 110V – 120V,
AC 200V – 240V 50/60Hz
Power consumption: 1230W (Standby mode: 2.7W)
Current consumption: Max 10.9A (AC 110V – 120V)
Max 6A (AC 200V – 240V)
Calorific power 4428kJ/h (1058kcal/h)
Air capacity - Intake: Approx. 3m
3
(106ft
3
)/min
Air capacity - Discharge: Approx. 3m
3
(106ft
3
)/min
Allowable operating temperature range: 10°C to
35°C (50 – 95°F)
Allowable operating humidity range: Less than 80%
(no condensation)
Allowable storage temperature range: -5°C to 60°C
(23 – 140°F)
Installation altitude: Operation guarantee: 2000m
(6560ft) and below
Performance guarantee: 1500m (4920ft) and below
Dimensions: 663 x 827 x 342mm
(26.1 x 32.6 x 13.5in) (W x D x H)
Mass: 55kg (121lb)
Dimensions with anamorphic lens: 675 x 977 x
342mm (26.6 x 38.5 x 13.5in) (W x D x H)
Inputs
Video input: DVI-D (dual link) 24 pins (supports 12-
bit extended input) x 4 (supports HDCP*)
LAN: RJ45 x 1
USB: Type B (Slave) x 1
RS-232C: D-sub 9 pins (male) x 1 (to scaler)
* HDCP is the abbreviation for High-bandwidth Digital
Content Protection system. Images from the DVI
input terminal may not be displayed due to HDCP
specification changes.
Optical system
Projection method: D-ILA analogue drive system x 3
D-ILA element *†: 1.27" (4096x2400 pixels) x 3 pcs
(total no. of pixels: 29,491,200 pixels)
Projection lens: See lens data sheets for options
Light-source lamp: 825W xenon lamp
Screen size: 2 – 7.6m (80 – 300in) approx (see lens
data)
Projection distance: Approx. 2.5 – 12m
(8.2 – 39.4ft)
* D-ILA is the abbreviation for Direct drive Image Light
Amplifier
D-ILA devices are manufactured using extremely
high-precision technology. Pixel effectiveness is
99.99%. Only 0.01% or less of the pixels would either
not light up or remain permanently lit up.
Signal system
Input format: From 810 scaler
DVI clock: to 165MHz (Single)
(Rx clock): to 330MHz (Dual)
Display resolution: 4096x2400
Notes
Some open source software is embedded in this
product. For more information, please contact
Meridian’s service dept.
Specifications and appearance of this product may
be subject to change for improvement without prior
notice.
Please note that some of the pictures and
illustrations may have been abridged, enlarged or
contextualised in order to aid comprehension. Images
may differ from the actual product.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Meridian 810 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Meridian 810 in the language / languages: English as an attachment in your email.

The manual is 1,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info