494958
69
Zoom out
Zoom in
Previous page
1/87
Next page
Configuring the DVD player
62
Choosing standard settings
The DVD player provides four standard settings, called Types,
which configure the 598 into the most commonly needed
configurations.
Choosing one of the four Types overrides any other
configuration you may have performed, and so can be used to
reset the configuration of the unit.
Types 1 and 2 are for use with multi-channel 96kHz surround
processors; choose Type 1 if you have a Meridian 568.2 or 861, or
Type 2 if you have a non-Meridian processor. Types 0 and 3 are
for use with surround processors without a multi-channel input;
choose Type 0 if you have a system that does not support 96kHz,
or Type 3 if you have a Meridian 96kHz surround processor.
The following table gives full details of each Type:
Type Main output Aux output
0 PCM, 48kHz Bitstream
1 PCM, 96kHz, multi-channel, MHR Bitstream, MHR
2 PCM, 96kHz, multi-channel Bitstream
3 Bitstream, 96kHz, MHR
Bitstream
All Types set the video output to S-video.
To restore the standard settings
Switch the 598 to standby.
Hold down Off (front panel).
After a short delay the display
will show:
Type,wait...
Press [ or ] on the front panel to change the Type
number.
For example, if you select Type 1
the display shows:
Type 1
Wait until the display shows:
Typing, wait
The display then shows:
Type 1
Press Off to switch back to standby.
Switch on again to use the 598 with the standard setting you
have selected.
69


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Meridian 598 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Meridian 598 in the language / languages: English as an attachment in your email.

The manual is 1,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info