494956
81
Zoom out
Zoom in
Previous page
1/131
Next page
Configuring the digital surround processor without a computer
74
This section explains how to use Sine/Sub mode to adjust the
subwoofer crossover frequency to suit the subwoofers in your
system, and use a sinewave test signal to check for room
resonances.
To turn on Sine/Sub mode
Put the digital surround processor into standby by pressing
Off (front panel or remote).
Press and hold the Mute key on the front panel for at least
five seconds.
The display shows:
Sine/Sub On
The 568 will then return to standby with Sine/Sub mode turned
on.
Sine/Sub mode adds two extra options to the DSP parameter
menus: Sine and Xover.
To turn off Sine/Sub mode
Repeat the above procedure until
the display shows:
Sine/Sub Off
To adjust the subwoofer crossover
frequency
The 568 allows the crossover frequency for any subwoofers
which you have to be adjusted between 30 and 120Hz. The
crossover can be set independently for Music, Logic, and 5.1
Movie presets. The default is the THX standard of 80Hz.
Turn on Sine/Sub mode, as described above.
Press < or > (remote) until the display shows the current
crossover frequency.
For example:
Xover 80Hz
Press A or V (remote) to set the crossover frequency.
For THX loudspeaker systems you should not adjust these
settings – they should be left at 80Hz. 80Hz is also the
recommended setting for all movie listening. You may prefer,
however, to lower the crossover frequency for music if your main
speakers have good bass handling down to, say, 50Hz.
Setting up subwoofers
81


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Meridian 568 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Meridian 568 in the language / languages: English as an attachment in your email.

The manual is 1,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info