494956
74
Zoom out
Zoom in
Previous page
1/131
Next page
Configuring the digital surround processor without a computer
67
Calibrating the system
To help you to set up your installation to give the best possible
sound with any particular combination of associated equipment,
the 568 Digital Surround Processor includes a built-in calibration
procedure.
This calibration procedure uses test signals to present a series
of sounds, which you use to adjust certain aspects of the
system to their optimum settings.
You should work through the calibration procedure the first time
you set up your surround sound system, and whenever you want
to check the calibration, such as after changing the layout of
your room.
Using the calibration procedure
We recommend that you perform the calibration procedure
using the Meridian System Remote and from the listening
position.
As you run the calibration procedure the name of each
calibration test is shown on the front-panel display, followed by
the parameters adjusted in the test.
If your digital surround processor is connected to a television or
monitor, the on-screen display also provides additional text
explaining what to do. For information about setting up the on-
screen display refer to Connecting video, page 55.
Each calibration test uses a test signal designed to give the best
results.
Using a Sound Pressure Level meter
Although you can perform the calibration procedure by ear, it is
recommended that you perform the tests using a Sound
Pressure Level meter. These are available fairly cheaply from
Tandy/Radio Shack, or your Meridian dealer may be able to lend
you one.
Set the Sound Pressure Level meter to C weighted, and Slow.
Take readings with the meter at the listening position, pointing
vertically. You should hold the meter with an outstretched arm to
minimise reflections from your body.
74


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Meridian 568 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Meridian 568 in the language / languages: English as an attachment in your email.

The manual is 1,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info