494950
13
Zoom out
Zoom in
Previous page
1/25
Next page
Setting up the multi channel power amplifier
8
Outputs
The following table gives details of the output connections:
Use this output To connect to this
CHANNEL 1 to Loudspeakers of 4 to 15, using
CHANNEL 5 either plug or bare wire connections.
The recommended assignment of channels, to make best use of
the capacity of each power supply, is as follows:
Channel Assignment
CHANNEL 1 Main left
CHANNEL 2 Main right
CHANNEL 3 Centre
CHANNEL 4 Rear left
CHANNEL 5 Rear right
Alternatively, channels 1/2 and 4/5 can be used in bridged
output mode; see To wire to A500 Loudspeakers in bridged
mode, page 12.
Each channel of the 558 Multi Channel Power Amplifier provides
twin outputs for bi-wiring. On speakers that provide separate
connections to the bass/mid and tweeter units this allows the
units to be connected independently to the multi channel power
amplifier, for optimum sound quality.
Alternatively, for loudspeakers providing a single pair of inputs,
either of the output terminals can be used.
Inputs
The following two alternative audio inputs are provided for each
channel:
Use this input To connect to this
UNBALANCED A preamplifier, using phono connectors
and high-quality screened cable.
BALANCED A balanced analogue output, using
XLR connectors:
1 (Green) = GND
2 (Red) = +ve
3 (Black) = -ve
Select the appropriate input using the INPUT SELECTOR for
each channel.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Meridian 558 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Meridian 558 in the language / languages: English as an attachment in your email.

The manual is 0,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info