494945
53
Zoom out
Zoom in
Previous page
1/72
Next page
Setting up sources
47
To connect to Meridian 600 or 200
Series equipment
If your system includes any Meridian 600 or 200 Series units,
with 600 COMMS or 200 COMMS sockets, you should set all
the 500 Series units to 200 COMMS operation using the
following procedure:
Turn off the control unit, using the power switch on the back
panel.
Turn on the power again while holding down the Off key on
the front panel.
The display will show the current
Type setting:
Type 1
Press A and V on the front panel to change the Type setting
to Type 2.
The display will show:
Type 2
Switch the power off and on again to restore the control unit
to normal operation.
Configure the Meridian System Remote for 601 operation; see
the Meridian System Remote User Guide for details.
To return to 500 COMMS operation repeat the above
procedure, and select any type apart from Type 2. For more
information see Choosing standard settings, page 36.
What next?
Congratulations – your 541 Surround Controller is now set up
and ready for use. Refer to the chapter Using the surround
controller for details of using the surround controller with your
music and cinema sources.
53


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Meridian 541 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Meridian 541 in the language / languages: English as an attachment in your email.

The manual is 0,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info