494945
36
Zoom out
Zoom in
Previous page
1/72
Next page
Setting up the surround controller
30
Video connections
The following table gives details of the composite video inputs:
Use this input To connect to this
LD/V1, TV/V2, Composite video signals.
VCR1/V3
The following table gives details of the composite video outputs:
Use this output To connect to this
TV Video input for a TV or monitor.
VCR Composite video recorder inputs.
The composite video connections should be made with phono
connectors, and high-quality 75 screened cable. These are the
same cables as used for digital audio, and suitable cables are
available from Meridian. We do not recommend using audio
cables, which do not have adequate shielding or the correct
impedance, or cables intended for UHF applications, as these
do not provide adequate shielding in the 1-30MHz region.
On-screen display
If your surround system includes video or a television the 541
can add a text overlay to the video signal, to provide additional
information about its operation in the form of a textual on-screen
display (OSD). In normal operation this repeats the information
provided on the front panel display. During calibration the on-
screen display provides additional guidelines to help you
perform the calibration sequence.
The on-screen display automatically locks to an NTSC, PAL, or
SECAM signals, and it requires an input signal to operate. The
video circuits in the 541 are of extremely high quality, and
passing the video signal through the surround controller will not
affect its quality.
Communications connections
The Comms sockets should be used to interconnect any other
Meridian 500 series equipment in the system.
The RS232 connection is for future expansion, to allow the 541
Surround Controller to be interfaced to a computer. For further
details contact Meridian.
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Meridian 541 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Meridian 541 in the language / languages: English as an attachment in your email.

The manual is 0,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info