494943
33
Zoom out
Zoom in
Previous page
1/58
Next page
Using 518 for Mastering and Multimedia 33
518 User Guide
Memory
In Mastering Processor mode, 518 maintains a continuous memory of the
DSP, Dither, Gain, In and Out settings for each source.
So, if you had determined that, e.g. D1 is an 18 bit source that should
always use Gain 0dB but that D2 is 16 bit and can always use Emphasis
and +2dB, then 518 will remember these and automatically reconfigure
itself for each source as you switch between them.
DSP
1. Press DSP to select the primary processing mode.
The display will show:
Bypass 0
Bypass transmits all 24 bits on the input to the output without any
processing.
Note When Bypass is chosen, all the other front panel keys are disabled.
1. Press DSP again.
The display will show:
Gain 0
Gain has a flat frequency response, but the level of the signal level is
adjusted using a precision dithered multiplication. All the front panel
keys are available to specify processing.
1. Press DSP again.
The display will show:
Emph 0
Emphasis ensures that the output of 518 is always pre-emphasised
according to the 50/15µs CD standard. 518 uses precision DSP to pre-
emphasis the signal providing the incoming signal is not already pre-
emphasised. If the incoming signal is pre-emphasised the red Emph
light indicates this.
or:
De-Emph 0
De-Emph provides the CD de-emphasis function to very high precision
providing the incoming signal is emphasised (Emph light on).
Note Gain functions in Emphasis and De-Emphasis, and all the front
panel keys are available to specify processing.
Display
1. Press Display key to select between the following display formats
Emph +2
Pre-emphasis option and gain setting, or
ShpB +2
Dither mode and gain setting, or
CD +2
Source and gain setting, or
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Meridian 518 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Meridian 518 in the language / languages: English as an attachment in your email.

The manual is 0,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info