494943
26
Zoom out
Zoom in
Previous page
1/58
Next page
Customising 518 using Config 26
518 User Guide
Setting the Blank display option for 518
In Config mode:
1. Press Display until you see a display like:
This means that a blank display is one of the options offered by the
Display key. To remove this option chose N.
2. Use the
and , Volume keys to choose between Yes or No.
Setting the Emphasis option for 518
In Config mode:
1. Press Display until you see a display like:
*Emph Y means that pre-emphasis will be 'forced' on the output signal
irrespective of the incoming channel status (displayed with the Emph
light). Normally Emphasis is an adaptive setting that guarantees pre-
emphasis on the output. There may be requirements in mastering where
pre-emphasis needs to be applied even though incoming emphasis is
indicated.
'*Emph N' means use the adaptive method.
2. Use the
and , Volume keys to choose between Yes or No.
Chose 'Y' to over-ride the incoming emphasis flag
1
.
If in doubt chose 'N'. '*Emph Y’ is not needed in normal use.
Setting the Volume mode for 518
In Config mode:
1. Press Display until you see a display like:
In the 500 Comms system there is provision for two volume controls, main
and secondary.
2. Use the
and , Volume keys to choose between:
N. No means that the gain control in 518 is independent of any
other Meridian components in the system and is stored by Source.
M. Volume Main means that the volume control in 518 will follow
the main Meridian system and respond to the red keys on the
remote.
S. Volume secondary means that the volume control in 518 will
follow the second volume control in the system and respond to the
shifted volume command on the remote. (Fn + Volume)
For further details on shifted commands see the manual supplied with the
remote control.
If in doubt choose VolM for a preamp and N for Resolution Enhancement.
Setting the Volume display
In Config mode:
1. Press Display until you see a display like:
1
Note. *Emph also allows De-emphasis of a signal not shown to be
emphasised.
Blank
Y
*Emph
N
Vol.
N
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Meridian 518 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Meridian 518 in the language / languages: English as an attachment in your email.

The manual is 0,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info