494943
14
Zoom out
Zoom in
Previous page
1/58
Next page
Using 518 in Hi Fi Systems 14
518 User Guide
Starting off with 518
Checking
Before turning on the power, check once again that you have made all the
connections correctly.
The 518 is designed to be left connected to AC power at all times and can
be run continuously.
Switching on
The power switch is located directly next to the power inlet on the right-
rear of 518.
1. Turn on the power switch at the rear of the unit. A small point on the
display should now be illuminated.
If there is no display
Check the integrity of the power connections, including any fuses in the
supply. If the display is still not illuminated, contact your dealer for help.
Memory
The 518 stores your latest settings for each Source in non-volatile
EEPROM memory and automatically returns to these settings either when
you come back to that Source, or on power-up.
The settings which are remembered for each Source are:
Gain (not volume in Control Unit mode)
DSP
Dither
In
Out
Standby
The entire 500 Series is designed to be left connected to AC power at all
times.
This Standby state ensures that the components operate at maximum
efficiency from the moment you start listening. It is perfectly safe and
consumes a negligible amount of power. However, when you are not
going to use your system for an extended period of time, e.g. when you
are going on holiday, we would advise you to disconnect it from the AC
power supply.
Basic operation of 518
The majority of functions are available from the front panel controls. When
used as a preamplifier (Type 0), more functions are available using the
Meridian System Remote control. See ' Advanced operation using the
Remote Control' on page 15.
This section describes the front-panel operation for those controls that are
common to all applications.
The following sections describe differences when operating 518 as a
Control unit, as a Resolution Enhancer and as a Mastering processor.
.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Meridian 518 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Meridian 518 in the language / languages: English as an attachment in your email.

The manual is 0,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info