494940
25
Zoom out
Zoom in
Previous page
1/31
Next page
Setting up the CD player
20
To connect to DSP6000 or DSP5000
Digital Loudspeakers
Connect the socket marked DIGITAL OUTPUT on the back
panel of the CD player to the M-lead, supplied with the
DSP6000 or DSP5000 speakers.
Follow the instructions provided in the DSP6000 or DSP5000
manual for connecting to a CD player.
The DSP6000 and DSP5000 loudspeakers are fully
programmable, and you should consult your manual before
deciding which input to use. If you have any doubts, your dealer
will be able to assist you.
Suitable cables are available from your Meridian dealer, or
Meridian Audio Limited.
To connect to Meridian 600 or 200
Series equipment
If your system includes any Meridian 600 or 200 Series units,
with 600 COMMS or 200 COMMS sockets, you should set all
the 500 Series units to 200 COMMS operation using the
following procedure:
Turn off the CD player, using the power switch on the back
panel.
Turn on the power again while holding down the Off key on
the front panel.
The display will show
the current setup:
Type 1
Press ] (Next) on the front panel
to change to Type 2:
Type 2
Switch the power off and on again to restore the CD player to
normal operation.
To return to 500 COMMS operation repeat the above
procedure, and select Type 1.
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Meridian 506 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Meridian 506 in the language / languages: English as an attachment in your email.

The manual is 0,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info